series of submersible pumps Seller, Supplier, Exporter, Manufacturer, Factory

series of submersible pumps
MINDONG DADI MOTOR CO.,LTD.
[ view MINDONG DADI MOTOR CO.,LTD. company information and other listings ]

series of submersible pumps

PERFORMANCE RANGE

Flow rate up to 200 l/min (12m 3 /h)

Dynamic head up to 11m

OPERATING LIMITS
Maximum operating depth 2m below water level

Maximum fluid temperature+400C

Maximum passage for suspended solids 10mm

Maximum emptying level 9mm form the bottom

WORKING PRINCIPLE
The QSA is a single open impeller centrifugal submersible drainage pump designed to function either partly or totally submerged. The impeller, mounted on the end of the drive shaft, consists of a back disk and blades. The fluid enters the rotating blade channel through the suction, where it moves radially from the center outwards, acquiring energy, and the fluid leaves the pump via the side delivery opening in the pump body. Correct motor cooling is ensured by the fluid being pumped.

PUMP INSTALLATION AND APPLICATIONS
QSB is designed to pump clear or slightly dirty water not containing abrasive substances.

IT IS RECOMMENDED FOR SMALL EMPTYING JOBS SUCH AS FLOODED BASEMENTS AND GARAGES, HOLIDAY HOMES, TUBS AND USED DOMESTIC WATER DISPOSAL.

A purposely built pit with minimum dimensions 350 × 350 × 350h mm is recommended for fixed installation, to provide total drainage and allow correct operation of the float switch. This system automatically starts the pump when the fluid reaches a preset level, stopping it once the fluid has been emptied. Installing a suitable non return valve on the delivery pipe prevents reverse flow when the pump stops.

PERFORMANCE
When designing performance level for the QSA pump, special attention was given to typical requirements for domestic usage. –Performance curve specially designed for high rates at the low installed power rating.

STRUCTURAL CHARACTERISTICS
• stainless steel DELIVERY BODY

• stainless steel BASE

• Technopolymer open impeller

• EXTERNAL FLOAT SWITCH for automatic pump operation

• Stainless steel MOTOR SHAFT

• Carbon/alumina MECHANICAL SEAL.

• Sealed induction MOTOR designed for continuous duty.

• The thermal cutout relay (motor protector) is incorporated.

• INSULATION class B

• Neoprene submerged SUPPLY CABLE. Supplied standard with 5 metres of cable and plug (10 meters on request) .

• CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.

WARRANTY: 1 YEAR (according to our general sales conditions)

Other listings in

Pumps & Pumping Equipment

for

MINDONG DADI MOTOR CO.,LTD.


series of peripheral pumps	series of centrifugal pumps	Sell series of jet pumps

Category :	Pumps & Pumping Equipment
Related Searches :	pump , pumps , submersible pump , submersible pumps , submersibles , submersibles pumps , submersion pump , submersion pumps
Country Of Origin :	China
Listing Type :	Sell
Certifications :	ISO9001,2000,CE ,UL
Power :	for customer's requirement
Supply Capacity :	20,000 units per month
Contact :	Roger PAN
Address :	NO.2 BANZHONG INDUSTRIAL AREA FUAN, Fujian, 355017 China
Telephone :	[86] (593) 6370198
Fax :	[86] (593) 6379966