Dry Solid Lubricants for Metal Surfaces Seller, Supplier, Exporter, Manufacturer, Factory

Dry Solid Lubricants for Metal Surfaces
dMT-GMS Ltd.
[ view dMT-GMS Ltd. company information and other listings ]

Dry Solid Lubricants for Metal Surfaces

dMT-SPC Products provide a modern, efficient and labor-free method of protecting surfaces in the most difficult applications areas – in some cases the only method. The products are a mixture of special components (NO GRAPHITE) which bond with the metal surfaces and create a pre-determined, optimal coefficient of friction between surfaces for use in numerous industrial applications.

dMT-SPC Blocks coat metal surfaces with a solid, non-migrating, protective layer approximately 10 microns thick. This coating: (a) maintains a constant, optimal coefficient of friction between the contacting surfaces – with block type T a low value of ca. 0.05 and with block type M a much higher value of about 0.30 (traction effect to prevent slippage) – and (b) protects the metal surfaces from flaking, pitting, etc. Manual application with all its disadvantages and costs is not required. Wear of the metal surfaces is reduced, therefore increasing substantially the life of these machine parts.

dMT-SPC Blocks are supplied in various lengths and widths to coat all metal surfaces from 19 - 60 mm wide. For wider surfaces blocks can be mounted adjacent to each other or custom solutions can be offered. Heavy-duty, spring-loaded, stainless steel applicators are delivered with the blocks. Installation is usually quite simple and low cost.
dMT-SPC Blocks are most economical in applications where conventional lubricants (greases and oils) cannot be used, or are used with high material and labor costs, especially in very dusty, high temperature or wet applications. In comparison dMT-SPC Blocks offer the following characteristics and cost-saving benefits:

* absolutely dry and dust repellent;
* do not drip or “migrate“;
* maintenance-free and long-lasting;
* coat continually & uniformly, reduce wear;
* coat wet surfaces;
* high temperature resistance (300ºC/575ºF) ;
* not harmful to the environment.

These products also contribute to noise reduction, (i. e. on locomotive and rail car wheels / rails) .

The products can be effectively applied to:

* crane wheel flanges and treads, and all other
types of wheel / rail-equipped systems;
* trunnions, rings and thrust buttons on all
rotating equipment, (i. e. kilns, dryers, mills,
etc. ) ;
* steel cables on pulleys, cranes, etc. ;
* chains;
* locomotive wheels;
* various other metal surfaces

Please contact us if you are interested in learning more about this innovative and cost-saving concept.

We are also searching for mechanically-oriented, industrial-sales representatives or stock-keeping distributors to market this product group in various territories world-wide and welcome inquires from interested persons or companies.

Category :	Lubricants
Related Searches :	dry , lubricants , metal surface , metal surfaces , metalized surfaces , metallic surfaces , solid lubricants , solidant , surface
Country Of Origin :	Germany
Listing Type :	Sell
Brand Name :	SPC surface protective coatings
Condition :	New
Terms Of Sale :	ex-works Munich
Terms Of Payment :	secured
Lead Time :	1 week
Warranty :	yes
Power :	none
Contact :	R. deMotte
Address :	Bernadottestr. 17 Munich, Bavaria, 81827 Germany
Telephone :	[49] (8106) 304069
Fax :	[49] (8106) 306829