Mechanical seals (YH-YTS-1) Seller, Supplier, Exporter, Manufacturer, Factory

Mechanical seals (YH-YTS-1)
Xi'an Yonghua Group Co.,Ltd.
[ view Xi'an Yonghua Group Co.,Ltd. company information and other listings ]

Mechanical seals (YH-YTS-1)

Dry Running Design --YTS-1:

YongHua's YTS-1 has successfully contained emissions and performed as a safety/backup seal in flashing hydrocarbon services and volatile organic compounds. As a result of its dry- running design, it provides a reliable and economical alternative to dual seals with liquid barrier systems.

Dry-Running Design Eliminates Liquid Barrier Systems!

Through the use of a specially designed bellows assembly and optimal face materials, the YTS-1 has proven itself through years of continuous service as a reliable dry-running seal, eliminating the need for liquid lubrication!
As a result, the following are eliminated:
• High initial costs of the barrier tank
• High initial costs of related system components
• Cost of barrier fluid
• Cost of cooling water
• Cost of long-term maintenance
• Seal failures resulting from barrier system operational problems
• Hazardous waste disposal issues of contaminated barrier fluid
Simple and Versatile Design
The YTS-1 is designed as a self-contained cartridge. When used with a standard YongHua primary seal, the YTS-1 requires less axial space than typical dual seal arrangements. The YTS-1 can be used with either a rotating or a stationary primary seal of a bellows or a pusher design.
High Temperature Applications
For applications above 204°C (400°F) , such as gas oils and heat transfer fluids, the YTS-1 is available in a high temperature design with Grafoil® or Kalrez® packings. In these applications, the YTS-1 will provide an additional level of safety during process or system upsets without the need for liquid lubrication typically used with liquid tandem seals.
Low Temperaturere Applications
For applications below 204°C (400°F) , the YTS-1 will contain any nominal leakage from the primary seal and act as a backup, providing an additional level of safety during process or system upsets. The YTS-1 is an effective solution to meeting emission requirements in flashing hydrocarbon services, such as propane, butane, and ethane, where the specific gravity is less than .600.
To maximize emissions containment, it is suggested that the gland cavity be vented to a vapor recovery system as shown in the piping schematic on the back of this brochure.

Materials of Construction :

Bellows: Inconel 718, Hastelloy®-C or Monel

Seal Faces: Carbon stationary vs. Sealide® rotating

Packings: Viton® in low temp. design

Grafoil or Kalrez in high temp. design

Other listings in

Gaskets & Seals

for

Xi'an Yonghua Group Co.,Ltd.


Mechanical seals (YH-YJ-1)	Mechanical seals (YH670)	Mechanical seals (YH680)

Mechanical seals (YH675,676)	Mechanical seals (YH609)	Mechanical seals (YH606)

Mechanical seals (YH604)

Category :	Gaskets & Seals
Related Searches :	mechanic seal , mechanic seals , mechanical seal , mechanical seals , seal , seals
Country Of Origin :	China
Listing Type :	Sell
Contact :	Mary Ma
Address :	No.69,MingGuang Road Xi'an, Shaanxi, 710021 China
Telephone :	[86] (29) 86537008
Fax :	[86] (29) 86519666