[ view Shenzhen Dowin Lightning Technologies Co.Ltd company information and other listings ]
YD25K385EH used in Single phase AC power system lightning/over-voltage protection
MAIN FEATURES
Adopted special temperature-controlled disconnect technology, thus stands to prevent thoroughly from fire risk.
Remote alarm terminal, convenient for remote monitor;
Two color LED indicate operating state syllabify and straightly;
Adopt symmetry compound circuit, common mode& differential mode protected;
Integrative design, convenient installation, simple maintenance;
PARAMETERS
TYPE
YD25K385EH
Nominal voltage Un
220V~, 50/60Hz
Max Continuous operating voltage Uc
320V~
Nominal discharge current In
10kA (8/20µs)
Maximum discharge current Imax
25kA (8/20µs)
Protective Level Up
1800V (10kA 8/20µs)
Power line clamp type lead section area
4 mm2~25 mm2
Enclosure dimensions
90*36*68mm (alarm terminal not included)
Working environments
Temperature -40~+70, Humidity relative <=95%, Altitude<=3km
INSTALLATION
1. Standard Din rail mount (NS 35) , install in the general power distribution cabinet.
2. Do connection when the SPD is well installed, power line SPD wiring should adopt the way shown in Chart1. (suggested) , if the Chart1. Can't be carried out should take the wiring as Chart2, the lead should be as short as possible, total length should within 0. 5M when Chart2 wiring adopted.
3. The remote alarm terminal is on the lower right of the SPD, connect the open circuit alarm system if remote alarm was needed. Under electrify condition, connect the alarm lead to the alarm connecting terminal first and then plug the terminal into the alarm interface while wiring. Shows as Chart3.
Other listings in
for
Category :
Surge Suppressors
Related Searches :
Country Of Origin :
China
Listing Type :
Sell
Certifications :
ISO 9001, CE
Contact :
Winnie Wang
Address :
4/F-A&B, Technology Building
Industry 7th Road, Shekou
Shenzhen, Guangdong, 508067
China
Telephone :
[86] (755) 26859924
Fax :
[86] (755) 26859922