antenna lightning protector Seller, Supplier, Exporter, Manufacturer, Factory

antenna lightning protector
Dowin Lightning Technologies Co., Ltd
[ view Dowin Lightning Technologies Co., Ltd company information and other listings ]

antenna lightning protector

TD*20K…P64M/W (* for connector type) series antenna lightning protector are designed for protection of antenna coaxial device and receive/transmit system, avoid destruction result from lightning over-voltage, induced over-voltage and static discharge.

MAIN FEATURE:
• Large discharge current;
• Wide working frequency range, DC pass
• Low insertion loss and voltage standing wave rate (VSWR) ;
• Stabile capability, good credibility
• Simple installation

PARAMETERS

Product Model TD*20K10P64#(F) TD*20K20P64#(F) TD*20K10P64#(F)
Working frequency range 0~1000MHZ 0~2000MHZ 0~2500MHZ
Continuous operating voltage Uc 64V
Nominal discharge current In 10kA (8/20µs)
Max. discharge Current Imax 20kA (8/20µs)
Protection level Up 8/700µs <=200V
VSWR <=1.2
Insertion Loss <=0.2dB
Notice: 1. Connector type and it’s corresponding SPD size is as following, ( In and Imax of SMA connector is half of the above data. ) . )
Connector type DIN
(7/16 L29) N BNC TNC SMA F
D N B T S F
Dimension (mm) 32×70 60×29
×25 57×29
×25 21
×54 48×29
×25 21×48
Working environments Temperature -25~+65°, Humidity relative<=95%(25°)
Reserve the right for technology revises
Notice: 2. , # represent for different input/output type, meaning shows as follows:
I/O Y M W X
# J/J J/K K/J K/K

INSTALLATION
1. Connect the protectors in series to the antenna circuit, and the protector should be closed to the equipment as much as possible.
2. Make connection lead as short as possible (lead section area not more then 2.5mm2) , and another port connect protector with grounding bar reliably.
3. Using outdoors must avoid rainwater immerging into the protector to erode the inner components.
4. No special maintenance needed. When malfunction occurs in operating system, remove protector, and check the system. If system recovers, it means the protector has been damaged and must be replaced.

Other listings in

Surge Suppressors

for

Dowin Lightning Technologies Co., Ltd


Coaxial Connections series signal protectors	surge arrester(module) for power supply	surge protector for power supply

Category :	Surge Suppressors
Related Searches :	antenna , antennae , antennas , lightning protector , protector , protectors
Country Of Origin :	China
Listing Type :	Sell
Brand Name :	DOWIN
Model Number :	TD*20K10P64#(F)
Condition :	New
Warranty :	3 years
Certifications :	ISO9001,CE
Contact :	serena Liu
Address :	4/F-A&B, Technology Building, Industry 7th Road,shekou Shenzhen, Guangdong, 518067 China
Telephone :	[86] (0755) 26889911 (ext 8927)
Fax :	[86] (0755) 26889922