CAULKING GUN Seller, Supplier, Exporter, Manufacturer, Factory

CAULKING GUN
Jinhua Runhua Group Co.,Ltd.
[ view Jinhua Runhua Group Co.,Ltd. company information and other listings ]

CAULKING GUN

CAULKING GUN
ITEM NO. RH0020
CRADLE TYPE
9",310ML
1PC/POLY BAG,24PCS/CTN
Caulking is the easiest way to seal against air and water. Use caulk to fill cracks between wood trim and your walls, inside the house and outside.
Instructions
STEP 1: Clean the area to be caulked, removing dirt, loose paint and old caulk. STEP 2: Be sure the area is dry before you begin. STEP 3: Load a tube of caulk into a caulking gun, making sure it's well seated at both ends.
STEP
4: Use a utility knife to cut the tip of the spout. Cut off as little as possible, taking into consideration the size of the 'bead' of caulk you need. Some people like to cut the spout at an angle, while others cut it straight;
it doesn't make a big difference.
STEP 5: If using caulk that comes in a cardboard tube, look for a second seal at the base of the spout. Insert a nail or awl through the spout to puncture the seal. Many caulking guns come with such a puncturing device. (Plastic tubes usually don't have a second, inner seal. )
STEP 6: Hold the gun at a slight angle. If you're filling a crack, insert the spout if you can; otherwise, run it at the surface.
STEP 7: Pull away from the bead slightly as you squeeze out the caulk, rather than push into it, which can be very messy.
STEP 8: Use just enough caulk to do the job. (Experiment in an out-of-the-way area. You may find that you'll need less of a bead than you think. )
STEP 9: Use your finger to gently press the caulk into the corner or crack
STEP 10: Use a damp towel or rag to clean off most of the excess caulk, then use a dry one to clean off the rest.

Other listings in

Hand Tools

for

Jinhua Runhua Group Co.,Ltd.


CAULKING GUN	CAULKING GUN	CAULKIN GUN

CAULKING GUN	caulkin gun

Category :	Hand Tools
Related Searches :	caulk
Country Of Origin :	China
Listing Type :	Sell
Model Number :	RH0020
Terms Of Sale :	FOB NINGBO/SHANGHAI
Terms Of Payment :	T/T
Minimum Order Quantity :	1200PCS
Lead Time :	30 DAYS
Contact :	Helen Sheng
Address :	9/F.,(E)International Trade Tower,369 ShuangXi West road Jinhua, Zhejiang, 321017 China
Telephone :	[86] (579) 2373169
Fax :	[86] (579) 3186628