Insulated Protective Cap Seller, Supplier, Exporter, Manufacturer, Factory

Insulated Protective Cap
Fujian CEE Installations Co.,Ltd.
[ view Fujian CEE Installations Co.,Ltd. company information and other listings ]

Insulated Protective Cap

The CEE JYM-15/200 Insulated Protective Cap is an accessory device designed to electrically insulate and mechanically seal loadbreak bushing interfaces. It also protect the de-energized interface from dust and damp.

The cap can be used for permanent or temporary installation on bushings, 200A junctions or feedthru devices. If there is a reserved interface in the junctions or the bushings, the insulated protective cap must be used.

This cap is molded of high quality EPDM insulation. when mated to a loadbreak product and the drain wire is attached to ground, the insulating protective cap provides a fully shielded insulating cover for energized bushings.

Other listings in

Electrical & Electronic Insulators

for

Fujian CEE Installations Co.,Ltd.


Premolded Cable Joint

Category :	Electrical & Electronic Insulators
Related Searches :	cap , caps , insulate , insulator , insulators , protective cap
Country Of Origin :	China
Listing Type :	Sell
Model Number :	CEE JYM-15/200
Contact :	Linda Wang
Address :	No.20, Jinzhou North Road Golden Mountain Industrial Zon Fuzhou, Fujian, 350001 China
Telephone :	[86] (591) 83849836
Fax :	[86] (591) 83849869

Hot Products: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Companies: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z