WeatherPro®-CP compressed fibre cement board (asbestos free) Seller, Supplier, Exporter, Manufacturer, Factory

WeatherPro®-CP compressed fibre cement board (asbestos free)
Soben International (Asia Pacific) Ltd
[ view Soben International (Asia Pacific) Ltd company information and other listings ]
II PRODUCT RANGE

Soben International Products are asbestos free, non-combustible, easy to use and transport; rot proof, anti-bacterial, resistant to insects and mould growth as well as maintenance friendly. They also possess impact resistance, good chemical resistance, moisture / condensation resistance, small expansion rate and low wastage. Their thermal insulation quality also helps save energy. The majority of its products series conform to various British Standards. All Soben International Boards are ISO9001:2000 (Certificate of Conformity of Quality Management System Certification) and ISO14001:1996 (Environmental Management System Certificate) certified and has obtained Certificate of China Environmental Labelling Products Certification.

Currently, Soben International has the following product ranges:

• Artistic Ceiling – Acoustic Series, Color Series, Textured Series
• DuraPanel Series – DuraPanel, DuraPanel-D
• FP® / FirePro® Series – FP®-900 / FirePro®, FP®-S / FirePro®-S
• MultiPro®
• NuClad®
• PVC Foam Board
• WeatherPan / WeatherPan-S
• WeatherPlank Siding Products – WeatherPlank Panel, WeatherPlank Siding, WeatherTrim
• WeatherPro® Series – WeatherPro®, WeatherPro®-CP, WeatherPro®-Flex, WeatherPro®-L,
WeatherPro®-S

III WEATHERPRO®-CP

(A) ABOUT WEATHERPRO®-CP

WeatherPro®-CP is a flat external grade high quality façade fibre cement reinforced calcium silicate board. It is made of non-combustible raw materials and has undergone an extremely high pressure pressing process, thus making WeatherPro®-CP a dense building board and inborn with good strength and good resistance to impact. It is designed for use in external building facades applications where high resistance to impact damage and weather resistance is required. WeatherPro®-CP is economical and durable when comparing with traditional concrete panel wall, cement-bond particle board for similar applications. A wide range of decorative finishes can be used, from site-applied acrylic textures, to available factory-applied polyurethane plain colours and metallic finishes. WeatherPro®-CP can be left un-painted. Its special performance of exemplary strength and durability prevents water or moisture penetration, a reliable substrate to receive heavy decorative finishes. The board is manufactured to ISO 9001 quality management system and ISO14001 environmental management system, and has obtained the Green Product Label Award issued by National Environment Protection Bureau.

WeatherPro®-CP is a highly compressed, high density fibre cement reinforced calcium silicate board (alias as compressed, high density fibre cement board) . It is formulated without asbestos or sepiolite or any other man made fibre. Its manufacturing process is pollution-free and hence the product is an environmentally friendly building material. WeatherPro®-CP is comprised of calcium silicate matrix, selected reinforced fibres and synthetic cement silicate binder. It has undergone a high pressure pressing process together with an autoclaving process inside a curing chamber where superheat steam under high pressure is injected for curing, as a result, enhancing high strength and durability of board that is capable of heavy duty usage. The synthetic cement silicate binder provides exceptional dimensional stability and an unrivalled resistance to movement due to effects of moisture or heat. WeatherPro®-CP will not rot or support fungal growth and is unaffected by sunlight and steam. The board does not contain any soluble ingredients or free alkali which could be dissolved out by moisture or condensation causing unsightly marks. It is watertight and fully weather resistant and its performance will not degrade in its lifetime when properly installed, WeatherPro®-CP is naturally light grey in color and has smooth surfaces on both sides. It can be left undecorated or can be easily decorated with paint finishes, alkali-resisting primer is not required. WeatherPro®-CP can be used as wall furring or left-in formwork for reinforced concrete construction or as a permanent exterior wall panel installed at high rise building. The unique characteristic of compressed high density autoclaved fibre cement reinforced calcium silicate means that WeatherPro®-CP is by itself moisture tolerant, it is tough, durable and resistance to impact damage. It is ideally used in areas where permanent damp or high humidity are anticipated, such as food processing plants or external locations.

Applications
WeatherPro®-CP can be used in a wide variety of building applications because of its easy working, fixing and decorating characteristics. Typical applications include:
• External wall claddings
• Impact & moisture resistant decorative claddings
• Fascias and shop fronts
• Pre-fabricated units with tiled wall
• Roof slates
• Floor decking
• Wall claddings in tunnel
• Service enclosures
• Noise barriers at highway
• Left-in formwork

(B) COMPOSITION

(i) General
Soben International products are manufactured from a mixture of Portland cement, silica sand reinforced with natural fibres. Products do not contain asbestos, formaldehyde, gypsum or glass fibre.

(ii) Chemical
CALCIUM SILICATE 50-60%
CRYSTALLINE SILICA 35-45%
CELLULOSE 10%

(iii) Performance

Density 1550 kg/m3 +/-6% (at EMC)
Weight 6mm – 10.30 kg/m2
9mm – 15.40 kg/m2
12mm – 18.60 kg/m2
Surface Alkalinity PH 7-10
Flexural strength (along grain) 17.5 N/mm2
Flexural strength (across grain) 21.0 N/mm2
Moisture movement (from ambient to saturated) 0.8~1.0 mm/m
Non-combustibility BS476: Part 4
Resistance to continuous heating 80°C
Moisture content Ex works - 10~15%
In situ - 6~7%
Coefficient of thermal expansion (-20~+80°C) 0.8 x 10-5 m/m. k
Coefficient of thermal Conductivity 0.28 W/m. k
Non-permeability No leakage after 6 hours of continuous water spray at 0.5litre/minute under 250Pa pressure
Freezing and Thawing test No damage or de-lamination after 25 cycles of freezing / thawing

Category :	Paneling
Related Searches :	asbestos , asbestos free , cement , cement board
Country Of Origin :	Hong Kong
Listing Type :	Sell
Certifications :	BS EN ISO
Contact :	H Ling
Address :	Unit 4A, Evernew Comm Centre 33 Pine Street, Kowloon Hong Kong, 000, 000 Hong Kong
Telephone :	[852] (-) 31732683
Fax :	[852] (-) 31732688