refrigeration cabinet and door inner linar multi-stations vacuum thermo-forming machine Seller, Supplier, Exporter, Manufacturer, Factory

refrigeration cabinet and door inner linar multi-stations vacuum thermo-forming machine
Elite Cooling Appliances Equipment Co., Ltd
[ view Elite Cooling Appliances Equipment Co., Ltd company information and other listings ]

refrigeration cabinet and door inner linar multi-stations vacuum thermo-forming machine

The thermoforming line is suitable for automatic forming of thermoplastic materials with thickness ranging from 3 to 5.2 mm and particularly ABS-HIPS sheet for refrigerator inner liner production.
This arrangement provides a compact design requiring the minimal amount of floor space. The machine has a flat base and does not require installation pits or special foundations. The material is moved between each station by parallel spiked chains driven by an electric motor.
Several solutions are available in order to increase productivity:
• Loading station: quick pallet change and centering device that allows large stacking tolerance
• Pre-heating, to reduce the total heating time
• Quartz heaters final heating station, for precise zoning and more efficient heating
• Forming station with:
o Double vacuum bell, to increase bubble control and cooling capacity
o Quick locking system for fast tool change
o Devices to increase cooling speed
o High performing hydraulic and mechanic systems
• Vertical cut, single guillotines for fast perimetral trimming
• Hydraulic punching press, with quick tool change and fast versionabile
• For operation, one supervisor can work from at least 3 locations

PRODUCTION CAPACITY

DOUBLE INNER LINER positive moulds – HIPS sheet of 3,8 mm 100 pieces/hour

Note: Above production capacities are the maximum obtainable in the best operating, environment and energy supply conditions, with first class plastic materials, high quality and temperature controlled moulds and well trained personnel.
In case of difficult shapes, the indicated productivity can decrease by 10%
The standard production capacity granted is 85% of maximum productivity taking in consideration start up and issues not related to the machine (for example the mould) .
From productivity are excluded the 10 minutes for tool change.

In order to increase productivity Cannon can provide the following options:
• Quartz heaters for increased heating performance
• High quality moulds

TECHNICAL DATA

• General Features

Maximum sheet size: mm 2.000 x 900
Maximum forming aperture: mm 1.900 x 800
Minimum sheet size: mm 1000 x 500
Maximum sheet thickness: mm 7 HIPS
Maximum height of mould: mm 900
Product height: mm 650
Maximum sheet stack height (including base) : mm 1000
Plastic sheet cut tolerance: ±5 mm
Product Profile: Suitable for male moulds for cabinets

• Preheating - Upper heater

Ceramic infra-red elements: 64
Element size: mm 244 x 60
Power of each element: W 400
Power installed: kW 25,6
Zoning: 4 zones

• Preheating - Lower heater

Ceramic infra-red elements: 64
Element size: mm 244 x 60
Power of each element: W 400
Power installed: kW 25,6
Zoning: 4 zones

• Main Heating - Upper heater

Quartz infra-red elements: 128
Element size: mm 125 x 60
Power of each element: W 325
Power installed: kW 41,6
Zoning: single
Optional: quartz, small size

• Main Heating - Lower heater

quartz infra-red elements: 64
Element size: mm 244 x 60
Power of each element: W 400
Power installed: kW 25,6
Zoning: single
Optional: quartz, small size

• Mould table

Movement: hydraulic
Stroke: mm 550
Air connections for mold inserts: 3 lines
Water connections for mold temp control: 3 lines

• Plug assist

present with motorised stops

• Vacuum system

Vacuum pump capacity: m3/hr 330
Vacuum pump electric motor: kW 6
Vacuum tank capacity: m3 2

• Product cooling

Fans for cooling: 10
Fan power: kW 0,37
Fan output: m3/hr 1.460

Service Requirements
• Electricity
3 Phase with neutral and earth 5 wires: Volts 380+10%/-6%
Frequency: Hz 50
Max connected load: kW 130
Minimum air pressure: bar 6

Note: the stated maximum connected load is relevant to the machine’s basic specification.
Employment of optional facilities will increase electrical power requirements.

Other listings in

Other Machinery & Equipment

for

Elite Cooling Appliances Equipment Co., Ltd


Single Station Vacuum Thermoforming Machine	refrigeration cabinet body linear fixtures Cabinet Foaming Line	refrigerator production line freezer can be made

refrigeration cabinet side U-shape shell, Left and right shells roller forming line	refrigeration door body 7 working-station Revolving Door Foaming Machine

Category :	Other Machinery & Equipment
Related Searches :	stations , cabinets , vacuum thermos , station , vacuums , form machine , forming machine , thermos , inner , innerate , linares , refrigerant , refrigerants , refrigerate , refrigerator
Country Of Origin :	China
Listing Type :	Sell
Contact :	leo zhang
Address :	Tech Economy Development Zone Chuquan road Meipu Chuzhou city, Anhui, 239000 China
Telephone :	[86] (550) 2120058
Fax :	[86] (550) 3219275