Gauge valves and instrument manifold Seller, Supplier, Exporter, Manufacturer, Factory

Gauge valves and instrument manifold
Fitok
[ view Fitok company information and other listings ]

Gauge valves and instrument manifold

Manifold
1. Maximum working pressures:
Stainless steel: 6000 psig (414 bar)
Alloy C-276: 6000 psig (414 bar)
Alloy 400: 5000 psig (345 bar)
2. Working temperatures:
PTFE: -65 ºF to 450 ºF (-54 ºC to 232 ºC)
Grafoil: -65 ºF to 1200 ºF (-54 ºC to 649 ºC)
3. Orifice: 0.157" (4.0 mm) ; CV: 0.35.
4. Two stems design. The upper stem has hardened threads, while the lower stem has hardened smooth surface.
6. Upper stem thread lubricant is isolated from system media.
7. The lower stem performs vertical linear movement instead of rotating movement, significantly reducing the friction area.
8. The non-rotating lower stem eliminates galling between the seat and tip.
9. Stem back seating seals in the fully open position.
10. Double lock-pins enable steady and durable fastening of the handle.
11. All designs are tested for strength with pure water at 1.5 times the working pressure. Every valve is tested with nitrogen for leak-tight performance at 6000 psig or its maximum working pressure if less than 6000 psig.

Other listings in

Valves

for

Fitok


Ball Valve	Ball Valve	Metering Valve

Metering Valve	Metering Valve	Diaphram Valve

Relief Valve	Bellow-sealed Valve	Needle Valve (NB)

Needle Valve	Plug Valve	Ball Valve

Category :	Valves
Related Searches :	gauge , gauge valves , gauges , instrument , instruments , manifold , valve , valves
Country Of Origin :	China
Listing Type :	Sell
Brand Name :	Fitok
Condition :	New
Terms Of Payment :	T/T
Contact :	Jack Wang
Address :	Blk 1,Jingshen Park,Huawang Rd Longhua, Baoan Shen zhen, Guangdong, 516000 China
Telephone :	[86] (0755) 28030560
Fax :	[86] (0755) 28032619