FHC-5004SF1 4-Port 10/100Base-TX + 1-Port 100Base-FX(SC/ST) Switch, with VLAN Seller, Supplier, Exporter, Manufacturer, Factory

FHC-5004SF1 4-Port 10/100Base-TX + 1-Port 100Base-FX(SC/ST) Switch, with VLAN
SHENZHEN FH-NET OPTOELECTRONICS CO.,LTD
[ view SHENZHEN FH-NET OPTOELECTRONICS CO.,LTD company information and other listings ]

FHC-5004SF1 4-Port 10/100Base-TX + 1-Port 100Base-FX(SC/ST) Switch, with VLAN

Description
FHC-5004SF1 is a kind of 10/100Mbps adaptive fast Ethernet fiber converter (also called optical-to-electric medium converter) with a built-in four-port 10M/100Mbps adaptive switch, which can implement mutual conversion between four independent 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals.

This type of fiber converter can extend the transmission distance of a network from 100m over copper wires to 120 Km (single-mode full duplex mode) . This type of fiber converter supports two different types of network connection media types: 10/100Base-TX and 100Base-FX. With the application of the switching technology and the storing & forwarding technology, the converter can implement data transmission between the two types of network connection media. This kind of converter supports transmission in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.

Key Features:

• Adaptive 10Mbps and 100Mbps environments, for the convenience of network upgrading;
• Efficient built-in switching core, to implement flow control and reduce broadcast packets;
• Providing four independent 10/100Mbps adaptive switching-type twisted pair ports, to implement electrical interface backup and multi-user access;
• Providing four electrical interfaces based on VLAN switch setting, and supporting the connection of users from different units;
• Supporting full-duplex and half duplex transmission modes and capable of automatic negotiation;
• Support no VLAN or concentration VLAN settings
• Supporting automatic crossing of twisted pair ports, for the convenience of system debugging and installation;
• Supporting the transmission of extra-long packets (with the maximum length of 1552 bytes) ;
• Supporting Quality of Service (QoS) and ensuring transmission of VoIP packets;
• Supporting Spanning Tree Protocol (STP) to form a redundant network;
• Low power consumption, low heat dissipation and capable of stable operation for a long period of time;
• Supporting the selection of multiple types of fiber ports such as dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode, expanding the requirements of users;
Application:

10/100Mbps fast Ethernet long-haul transmission network

Technical Specifications
Parameter Specifications
Access mode 10/100Mbps
Standard IEEE802.3 10Base-T Ethernet, IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control, IEEE802.1q VLAN, IEEE802.1p QoS, IEEE802.1d Spanning Tree
Wavelength 850nm/1310nm/1550nm
Transmission distance Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km
Category-5 twisted pair: 100m
Port Four RJ45 connector, connected to STP/UTP category-5 twisted pair
One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125µm)
Single mode - SC/FC fiber port (fiber size: 9/125µm)
Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125µm)
Conversion mode Medium conversion, storing and forwarding
MAC address table I K
Buffer space 1Mbit
Flow control Full duplex state: flow control; half duplex state: back pressure mode
Delay 9.6us
Bit error rate <1/1000000000
MTBF 100,000 hours
LED POWER (power) , FX LINK/ACT (fiber connection/action)
FDX (FX full duplex mode) , FX100 (Fiber, with a transmission rate of 100M)
TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection/action)
TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M)
Power DC5V/1A (external)
Power consumption 3.5W
Operating temperature -10~55ºC
Operating humidity 5%~90%
Storage temperature -40~70ºC
Storage humidity 5%~90% (non-condensing)
Dimensions 30mm(Height) *95mm(Width) *107mm(Depth) (external power)

Ordering Information
Model Transmission Rate
Mbps Mode Working Wavelength
(nm) Transmission Distance
(Km) Fiber Interface Power
FHC-5004MF1-SC/ST 10/100 Dual-fiber multi-mode 1310 2 SC/ST External DC5V/1A
FHC-5004SF1-D20/40/60 -SC/FC 10/100 Dual-fiber single-mode 1310 20/40/60 SC/FC External
DC5V/1A
FHC-5004SF1-D80/100/120-SC/FC 10/100 Dual-fiber single-mode 1310 80/100/120 SC/FC External DC5V/1A
FHC-5004SF1-S20/40/60/80/100 -SC/FC 10/100 single-fiber single-mode 1310,1550 20/40/60/80/100 SC/FC External DC5V/1A

Other listings in

Other Networking

for

SHENZHEN FH-NET OPTOELECTRONICS CO.,LTD


FHC-2U-CHASSIS 16 Slot Managed Media Converter Center	FHC-6100 Series One Channel Digital Video Optical Transmitter & Receiver	10/100M Single mode, Multi-mode, Dual fiber, Media Converter

Category :	Other Networking
Related Searches :	port , switch , switches
Country Of Origin :	China
Listing Type :	Sell
Price :	AUD 72.00
Brand Name :	FH-NET
Model Number :	FHC-5004
Condition :	New
Terms Of Sale :	FOB Shen Zhen
Terms Of Payment :	L/C at sight ,T/T in advance
Minimum Order Quantity :	10
Lead Time :	10 days
Warranty :	90days
Certifications :	FCC,CE,ROHS,UL
Dimensions :	30 x 95 x 107 mm
Weight :	0.6kg
Colors :	white
Power :	DC5V/1A (external)
Supply Capacity :	5,000 Units /Month
Contact :	Bo Liu
Address :	2/F,Block5,jiuxiangling Indust Shenzhen, Guangdong, 518055 China
Telephone :	[86] (0755) 86051202 (ext 8011)
Fax :	[86] (0755) 86051210