Two layer plastic sheet extrusion machine Seller, Supplier, Exporter, Manufacturer, Factory

Two layer plastic sheet extrusion machine
Europack Machines (India) Pvt Ltd
[ view Europack Machines (India) Pvt Ltd company information and other listings ]

Two layer plastic sheet extrusion machine

Complete Sheet Line
generally as described in the pages
enclosed & consisting of the following:

1. Extruder
2. Screen Changer
3. Sheet die. (T Die Fish tail type)
4. 3 roll calendar polishing stack assembly
5. Nip roller & side trimming unit.
6. 2 stage Torque Winder
7. Control Panel

EXTRUDER:

Material (Screw / Barrel) : EN 41B, Gas Nitrated, Hardness: 65 RC
L/d ratio: 28:1
Screw speed - rpm: 20 - 120
Max. Output 100 KGs
Screw Type: Barrier type with special mixing zone
Barrel Cooling: Jacketed water cooling on feeding zone &
Blower cooling on heating zones
Hopper: 50 Kg capacity with sight glass, emptying chute, shut off slide & lid
Type of Barrel Heaters Ceramic Band Heaters with digital temperature controllers
SCREEN CHANGERS:

Main Extruder Piston Type

SHEET DIE:

Die type: "T"
Die lip width: 680 mm
Die Material: high-grade hot work alloy steel.
Sheet width (after trimming) - mm: 600
Sheet thickness - mm: 0.2 - 1.5
No of heating zones: 3
Deckling locking, each side 50 mm
Flow surface: hardened, hard chrome plated and polished to mirror finish and completely flash chrome plated
Gearbox Helical with thrust bearing

CALENDAR UNIT:

No of Rolls 3 (1 fixed & 2 moving)
Chrome roller diameter (mm) : 250
Chrome roller face width (mm) : 720
Line speed - meters/ min. : 1 to 18
Roller cooling systems: water
Flow Channels Spiral
Roller Vertical Movement Pneumatic
Material of Rolls EN 19, Hardened to 65 RC, hard chrome plated, ground & mirror super finished to less than 1 RA

EUROPACK MACHINES
WINDER:

Type Constant Torque with 2 Stations
Pulling roller diameter (mm) : 100
Material One Rubber & another Hard Chrome Plated
Line speed - meters/ min. : 0 to 10
Side Trimming Unit 2 stainless steel blades with guide rollers.
Clutch Mechanical

MOTORS:

Extruder: 30 HP AC
Calendar Roller: 2 HP AC
Nip Roller 0.5 HP AC

DRIVES (AC VARIABLE FREQUENCY) :

Extruder 30 HP of Lenze, USA makes
Roller 2 HP AC

HEATERS:

65 MM Barrel 2 KW Band HeaterX4 Zones of 2 Heaters=16 KW
Piston Screen Changer 350 W Cartridge Heater X 4 Nos = 1.4 KW
Lever Type Screen Changer 1 KW Band Heater X 2 Nos = 2 KW
T Die 500 W Cartridge Heater X 13 Nos = 6.5 KW

MAKES OF COMPONENTS:

Drive Lenze, USA
Contactors GE
Push Buttons Technique / Rass
MCB Protec (Telemechanic)
Connectors El Max
Ampere & Volt Meter Meco / Beemet
Heaters Excel
Gearbox Sudarshan Gears / Anand

UTILITIES REQUIRED:

Power Supply 415 V +/- 5%, 50 C/S +/- 3%, 3 Phase
Air Compressor 2 HP
Chilling Plant 5 T with 3 Tanks
Connected Load 50 KW
Space Required 7 M X 3 M X 2 M (LWH) Approx

Other listings in

Plastics Machinery

for

Europack Machines (India) Pvt Ltd


Blown film plant	plastic bottle crusher	Extruder

Plastic sheet extruder	Sheet Extruder	Blown Film Plant

Air bubble film plant

Category :	Plastics Machinery
Related Searches :	extrusion machine , extrusion machines , sheet extrusion , layered plastic , layered plastic sheet , layered plastic sheets , layereds plastic , sheet extrusion machine , plastic sheet , plastic sheet extrusion , plastic sheeting , plastic sheets , plastics , plastics sheets , sheets
Country Of Origin :	India
Listing Type :	Sell
Contact :	Rajesh Potdar
Address :	14, Bindal Estate, Saki Naka Mumbai, Maharashtra, 400 072 India
Telephone :	[91] (93232) 49260
Fax :	[91] (22) 6694 2977