Fully-automatic Stretch Blow Molding Machine Seller, Supplier, Exporter, Manufacturer, Factory

Fully-automatic Stretch Blow Molding Machine
Zhejiang East Zhouqiang Plastic & Mould Industry Co.,Ltd.
[ view Zhejiang East Zhouqiang Plastic & Mould Industry Co.,Ltd. company information and other listings ]

Fully-automatic Stretch Blow Molding Machine

ZQ-D series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to four cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1) . High Automatization
2) . High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3) . High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4) . High Speed:2500BPH(4-cavity) 3800BPH(4-cavity) .
5) . No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6) . Low Cost:Low consumption of electricity, air and water.
7) . High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Settings:
a) . PLC colour display: OMRON(JAPAN)
b) . Pneumatic parts:FESTO(GERMANY)
c) . Controller of preform transfer:Servo motor National(JAPAN)
d) . Other electric parts are all world-famous brand
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.2 percent.
TYPE
ITEM
ZQ-D2500A
ZQ-D2500B
ZQ-D3200
ZQ-D3800

CONTAINER
Number of cavity
2 cavities
2 cavities
3 cavities
4 cavities

Theoretical output
1800-2500 pcs/hr
1700-2400 pcs/hr
2400-3200 pcs/hr
2800-3800 pcs/hr

Max. container volume
1.5L
2.0L
1.5L
1.5L

Max. neck diameter
38mm
38mm
38mm
38mm

Max. container diameter
90mm
105mm
90mm
105mm

Max. container height
330mm
330mm
330mm
330mm

ELECTRICAL SYSTEM
Number of lamp
32pcs
32pcs
40 pcs
52 pcs

Max. heating power
48kw
48kw
60kw
78kw

Installation power
51kw
51kw
63kw
63kw

Actual power consumption
16kw
16kw
20kw
24kw

AIR SYSTEM
Operatating pressure
7kg/cm²
7kg/cm²
7kg/cm²
7kg/cm²

Low pressure consuming
1100 Ltr/min
1100 Ltr/min
1400 Ltr/min
2000 Ltr/min

Blowing pressure
<=40kg/cm²
<=40kg/cm²
<=40kg/cm²
<=40kg/cm²

High pressure consuming
2000-2500Ltr/min
2000-2500Ltr/min
2000-3000Ltr/min
3000-3500Ltr/min

CHILLER WATER
Operating pressure
5-6 kg/cm²
5-6 kg/cm²
5-6 kg/cm²
5-6 kg/cm²

Temperatuer
10°
10°
10°
10°

Consuming
5600kcal/hr
5600kcal/hr
7600kcal/hr
7600kcal/hr

Flow rater
30Ltr/min
30Ltr/min
45Ltr/min
45Ltr/min

MACHINE
Machine dimension
3.0×1.7×2.0
3.0×1.7×2.0
3.0×1.7×2.0
2.1×1.9×2.0

Machine weight
2.5ton
2.8ton
3.0ton
3.2ton

Other listings in

Plastics Machinery

for

Zhejiang East Zhouqiang Plastic & Mould Industry Co.,Ltd.


Semi-automatic blow molding machine	Fully-automatic Stretch Blow Molding Machine	Automatic rotary PET blow molding machine

pneumatic blow molding machine	5-Gallon PET blowing machine	Automatic Extrusion Blow Molding Machine

Double Station Blow Machine	Single Station Blow Machine	Semi-automatic Blowing Machine For PMMA/PC Lamp

Automatic Rotary PET Blow Molding Machine	Fully-automatic Stretch Blow Molding Machine	Auto Stretch Blow Molding Machine

Category :	Plastics Machinery
Related Searches :	stretch blow molding machine , stretch blow molding machines , stretch blow molding , blow mold machine , blow mold machines , stretch blowing mold , blow molding , blow molding machine , blow molding machines , blow molds , blowing mold , blowing mold machine , blowing molding , blowing molding machine , blowing molds
Country Of Origin :	China
Listing Type :	Sell
Brand Name :	ZQ
Model Number :	ZQ-D2500A,ZQ-D2500B,ZQ-D3200,ZQ-
Condition :	New
Terms Of Sale :	FOB NINGBO, FOB SHANGHAI
Terms Of Payment :	T/T
Certifications :	CE
Contact :	Grace Fu
Address :	Zhaoyuan Road Western Industrial Area Huangyan, Zhejiang, 318020 China
Telephone :	[86] (576) 84081678
Fax :	[86] (576) 84081662