Linear bottle blowing machine Seller, Supplier, Exporter, Manufacturer, Factory

Linear bottle blowing machine
Zhejiang Demark Machinery Co., Ltd.
[ view Zhejiang Demark Machinery Co., Ltd. company information and other listings ]

Linear bottle blowing machine

A. Brief Introduction
It has one to six cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1) . High Automatization
2) . High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3) . High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4) . High Speed:2000BPH(2-cavity) , 3000BPH(3-cavity) , 4000BPH(4-cavity) , 6000BPH(6-cavity) .
5) . No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6) . Low Cost:Low consumption of electricity, air and water.
7) . High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.

B. Settings:
a) . PLC colour display: SIEMENS(GERMANY)
b) . Pneumatic parts:FESTO(GERMANY)
c) . Controller of preform transfer:Servo motor National(JAPAN)
d) . Other electric parts are all world-famous brand

C. Machine Features:
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.

D. Technical Parameter:
ITEM
DMK-L2
DMK-L3
DMK-L4
DMK-L6

Theoretical output
2000
3000
4000
6000

Max. container volume
1.25L
2L
1.25L
0.7L

Max. neck diameter
38MM
38MM
38MM
38MM

Max. container diameter
80MM
105MM
80MM
60MM

Max. container height
320MM
335MM
320MM
265MM

Number of cavity
2
3
4
6

Number of lamp
28
100
70
60

Max. heating power
42KW
100KW
84KW
90KW

Installation power
50KW
110KW
95KW
100KW

Actual power consumption
35KW
45KW
40KW
50KW

Operatating low pressure
0.7Mpa
0.7Mpa
0.7Mpa
0.7Mpa

Low pressure consuming
1400L/min
2000L/min
2000L/min
2000L/min

Blowing pressure
3.5Mpa
3.5Mpa
3.5Mpa
3.5Mpa

High pressure consuming
3500L/min
5500L/min
5000L/min
4500L/min

Operating pressure
0.3-0.5Mpa
0.3-0.5Mpa
0.3-0.5Mpa
0.3-0.5Mpa

Temperatuer
10°
10°
10°
10°

Flow rater
30 L/min
40 L/min
40 L/min
50L/min

Machine dimension
2.7×1.8×2.2
3.5×2×2.2
4×2×2.2
4.9×2.15×2.2

Machine weight
3500Kg
4200Kg
4800Kg
5000Kg


water cooled cased industrial chiller	Air cooled cased industrial chiller	Jar PET Preform Moulds With Shut-Off Nozzle(Without Tail)

PET Blow Moulding Machines(13000-18000 Bottles/Hour)	PET Blow Molding Machine-Reheat(5000-6000 Bottles/Hour)	48 Cav Pet Preform Moulding, Injection Molding Systems

32 Cavity-Pet Injection System Injection Moulding Machines	48 Cav Needle Valve of No-Cutting PET Preform Molds	Rotary blowing machine Max.600mL(18500-24000/bph)

Double Station Blow Molding Machine	Rotary PET Blow Molding Machine	preform mould 32 cavity

Related Searches :	stretch blow molding machine , linear machine , stretch blow molding , blow mold machine , blow mold machines
Country Of Origin :	China
Listing Type :	Sell
Brand Name :	DMK
Model Number :	L2,L3,L4,L6
Condition :	New
Terms Of Sale :	FOB NINGBO, FOB SHANGHAI
Terms Of Payment :	L/C at sight, T/T
Minimum Order Quantity :	1unit
Lead Time :	3months
Contact :	Grace Fu
Address :	Zhaoyuan Road Western Industrial Area Huangyan, Zhejiang, 318020 China
Telephone :	[86] (576) 84239222
Fax :	[86] (576) 84052345