Remote Control of Fishing Boat Seller, Supplier, Exporter, Manufacturer, Factory

Remote Control of Fishing Boat
S&P Technology Co., Ltd.
[ view S&P Technology Co., Ltd. company information and other listings ]

Remote Control of Fishing Boat

The spec description of remote control boat
A. Go forward control
Press the forward key on the receiver, the boat goes forward. Loose it, the boat moves on. Press the forward key again, stop
Control manner:
1. The receiver controller receives the forward signal and start the left and right drive machine and turn positive, remote control boat go forward.
2. After the receiver controller send out the signal to go forward, it will send out a confirmative signal to go forward timely each 2 seconds.
3. The receiver controller receive confirmative signal to go forward from remote control transmitter ceaselessly, and move on.
4. If the receiver controller doesn’t receive confirmative signal to go forward from remote control transmitter within 6s, the receiver controller will stop going on, and autocontrol retreat 10s. (If it doesn’t receive the confirmative signal to go forward from transmitter, means it leaves the maximum scope that the transmitter controller can control, so, auto retreat for 10sis convenient. )
5. During the process of controlling automatic retreat, if the receiver controller receives any available control signal from transmitter, automatic retreat operation stop, instead by hand operation.
6. When automatic retreat, the left and right turning lights flash one time per second at the same time.
7. Turn off the left and right machine input when it stops.
B. Retreat control
Press the retreat key on transmitter, boat retreats, loose the key, stop retreating.
Control manner:
1. Receiver controller turn on left and right machine at the same time and turn reverse, remote control boat retreats.
2. When retreat, the left and right turning lights flash one time per second at the same time.
3. Turn off the left and right machine input when it stops.
C. Left turning control
Press the left turning key on transmitter, boat turn left, loose it, stops.
Control manner:
1. Receiver controller only turn on the left machine and turn positive, turn off the right machine, remote control boat turning left.
2. During the process of left turning, the left turning light flashes one time per second.
3. Turn off the left and right machine input when it stops.
D. Right turning control
Press the right turning key on transmitter, boat turn right, loose it, stops.
Control manner:
1. Receiver controller only turn on the right machine and turn positive, turn off the left machine, remote control boat turning right.
2. During the process of right turning, the right turning light flashes one time per second.
3. Turn off the left and right machine input when it stops.
E. Left control for give out lure
Press the left key for give out lure on transmitter for 2s, the left lure box gives out lure one time.
Control manner:
1. Receiver controller turns on the left machine for five out lure and turn positive 5s.
2. After 5s, turn off output and keep for 2s.
3. Turn on left lure machine and turn reverse for 4.8s, the process of giving out lure finished.
4. During the process, left and right turning lights flash one time per second.
F. Right control for give out lure
Press the right key for give out lure on transmitter for 2s, the right lure box gives out lure one time.
Control manner:
1. Receiver controller turns on the right machine for five out lure and turn positive 5s.
2. After 5s, turn off output and keep for 2s.
3. Turn on right lure machine and turn reverse for 4.8s, the process of giving out lure finished.
4. During the process, left and right turning lights flash one time per second.
G. Headlight control
Before turning off the headlight, press the headlight key on transmitter one time and it lights; When the headlight is on, press the headlight key on transmitter one time and it off.
H. Standby output control one
Press left fishhook key for 2s, the left fishhook machine turn; Loose it, stops.
I. Standby output control two
Press right fishhook key for 2s, the left fishhook machine turn; Loose it, stops.
J. The code set between transmitter and receiver
Every transmitter has different ID. In order to letting transmitter and receiver controller use together, we use this operation process to finish the code matching between receiver and transmitter.
1. Electrify the receiver and transmitter.
2. Press code key on receiver 2s, then headlight lights, means come into a leaning code-matching state.
3. Press any key on transmitter, then press code-matching key on receiver for 2s.
4. After receiver gets the signal from transmitter, the headlight flashes 2 times, confirm that transmitter has code with receiver successfully, then we can use the code-matching transmitter to control receiver.
5. If it needs to code receiver and other transmitter, please repeat the approach 2-4 operation; Each receiver can code with 8 transmitters maximum.
6. If receiver has coded 8 transmitters, press code key again and comes into code state, loose code key, the headlight flashes 6 times, means can not code with more transmitter; If want to code new transmitter, please clear all transmitters that have coded.
Through the following operation clear all transmitters ID on receiver that have coded.
1. Electrify the receiver
2. Press receiver code key, 2s later headlight lights, means comes into learning code state.
3. Continue to press code key until 10s, headlight flashes 4 times, means elimination is finished.
K. Key operation
1. It is available when press one key, and not available for many key.
2. After press the go forward key to control forward, transmitter send out confirmative signal to go forward each 2s timely. After press forward, retreat, left turning, right turning, stop the transmit confirmative signal timely.
Technology spec
1. transmitter
Working frequency: 433MHZ
Modulation Manner: FSK
Static state current: 10uA
Transmitter current: <100ma
Working temperature: -40~85°
Storage temperature: -50°~100°
Working voltage: 4.5V (3 No.7 batteries with 1.5V)
2. receiver
Working frequency: 433MHZ
Modulation manner: FSK
Available control for distance(open air) : >500m
Working current: 20mA
Working temperature: -40~85°;
Storage temperature: -50°~100°
Working voltage: 12V

3. The drive ability of receiver
1. relay output:>5A
2. light drive circuit: >50ma
light output drive is open collector, and the drive ability is strong.


Remote control	Wireless Receiver/Relay	Remote Control Copy Machine

Wireless Transmit Module	Wireless receiver module

Related Searches :	fishing boat remote control , fishing boat auto-pilot
Country Of Origin :	China
Listing Type :	Sell
Brand Name :	KST
Model Number :	10
Contact :	Elaine Li
Address :	Ban an District Shenzhen, Guangdong, 518101 China
Telephone :	[86] (0755) 27840581

Remote Control of Fishing Boat

Remote control

Wireless Receiver/Relay

Remote Control Copy Machine

Wireless Transmit Module

Wireless receiver module

fishing boat remote control

fishing boat auto-pilot