Carbide rods for PCB router & end mill Seller, Supplier, Exporter, Manufacturer, Factory

Carbide rods for PCB router & end mill
Taike Technology(Suzhou) Co.,Ltd
[ view Taike Technology(Suzhou) Co.,Ltd company information and other listings ]

Carbide rods for PCB router & end mill

Item No. SP101 SP102 SP103 SP303
ISO K05-K10 K05 K10 K10-K20
Density. g/cm3 14.41 14.50-14.70 14.70-14.90 14.30-14.60
Hardness. HRA >=93.0 >=93.0 >=93.8 >=92.2
TRS. N/mm2 >=3700 >=3600 >=2800 >=3600
WC grain size. µm< 0.5µ <0.5µ <=0.3µ <0.6µ
Co. 9.5% 8% 6 % 10%
Applied Tools PCB routers & drills (flute dial. < ¢0.8mm) PCB routers & drills (flute dial. ¢0.8-2.4mm) PCB drills ( Medium flute) End mills, worm drills, gravers, reamers
Applied Machining Material PC base-plate, Alloy Al-Mg
PC base-plate, Alloy Al-Mg PC base-plate, Alloy Al-Mg Non-iron alloy, heat-resistance alloy steel, stainless steel, Alloy Titanium, Alloy Al and Acryl Board


end mill	Carbide Rods

Related Searches :	carbide rods
Country Of Origin :	China
Listing Type :	Sell
Contact :	daphne Cheung
Address :	No.20, Chengyang Road Xiangchneng District Suzhou, Jiangsu, 215131 China
Telephone :	[86] (512) 65760786 (ext 8003)
Fax :	[86] (512) 65769909

Hot Products: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Companies: 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Carbide rods for PCB router & end mill

end mill

Carbide Rods

carbide rods