32 Cavity-Pet Injection System Injection Moulding Machines Seller, Supplier, Exporter, Manufacturer, Factory

32 Cavity-Pet Injection System Injection Moulding Machines
Zhejiang Demark Machinery Co., Ltd.
[ view Zhejiang Demark Machinery Co., Ltd. company information and other listings ]

32 Cavity-Pet Injection System Injection Moulding Machines

Demark 32 cavities pet preform injection molding system@(injection moulding system@injection molding machine@injection moulding machine@) uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

Demark pet preform injection moulding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.
Demark pet injection systems offer:
1. Faster cycles
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up

Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;

Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
1. Allow for 10-30% lower clamp tonnage
2. Decrease mold wear
3. Improve part quality

Injection Units
demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.

Polaris Controls
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface

Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.

Technical Parameter:
TYPE DMk-PET32
INJECTION UNIT Screw L/D Ratio L/D 25

Injection Pressure Kgf/Cm² 1080

Machine Size(LxWxH) mm 8650×3600×2200

Theory Shot Volume(Max) cm 1700

Shot Weight(PS) g 2040
ozs 72
CLAMPING UNIT Clamping Force T 280

Clamping Stroke mm 545

Max/Min Thickness of Mould mm 280~700

Space Between Tie Bars (WxH) mm 610×610

Ejector Stroke mm 150

Ejector Force T 10

NO. of Ejector Pins pcs 5

Max Pressure of System Kg/Cm² 140

INJECTION MOULD Cavity (Max) PCS 32

Neck of Bottle (Max) mm 42

Length of Preform(Max) mm 190

Weight of Preform(Max) g 45

Form of Mould Pneumatic pin-valve gate hot-runner

POWER UNIT Pump Motor Power KW 45

Robot Power KW 12

No. of Heater Zones(0~400°) set 33+8

Heater Input Capacity . KW 40

Mould Heater Capacity KW 38

Auto Manipulator Manipulator Cav 96

Cooling Form Cav 96

OTHER REQUEST Electric Power supply
(3-phase AC) V 380
KW 130
Chilling Water degree 5-15
Mpa 0.48
L/min 420
Cooling Water degree 30~55
Mpa 0.25
L/min 100
Compressed Air Mpa 0.7-0.9
L/min 570
Compressed Air (Max) Pcs/h 9600


water cooled cased industrial chiller	Air cooled cased industrial chiller	Jar PET Preform Moulds With Shut-Off Nozzle(Without Tail)

PET Blow Moulding Machines(13000-18000 Bottles/Hour)	PET Blow Molding Machine-Reheat(5000-6000 Bottles/Hour)	48 Cav Pet Preform Moulding, Injection Molding Systems

48 Cav Needle Valve of No-Cutting PET Preform Molds	Linear bottle blowing machine	Rotary blowing machine Max.600mL(18500-24000/bph)

Double Station Blow Molding Machine	Rotary PET Blow Molding Machine	preform mould 32 cavity

Related Searches :	pet preform injection machine , injection molding machine , high speed injection machine
Country Of Origin :	China
Listing Type :	Sell
Contact :	Grace Fu
Address :	Zhaoyuan Road Western Industrial Area Huangyan, Zhejiang, 318020 China
Telephone :	[86] (576) 84239222
Fax :	[86] (576) 84052345