48 Cav Pet Preform Moulding, Injection Molding Systems Seller, Supplier, Exporter, Manufacturer, Factory

48 Cav Pet Preform Moulding, Injection Molding Systems
Zhejiang Demark Machinery Co., Ltd.
[ view Zhejiang Demark Machinery Co., Ltd. company information and other listings ]

48 Cav Pet Preform Moulding, Injection Molding Systems

Demark 48 cavities pet preform injection molding system@(injection moulding system@injection molding machine@injection moulding machine@) uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.

Demark pet preform injection moulding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 72 cavities.

Demark pet injection systems offer:
1. Faster cycles
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up

Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;

Reflex Platens
Reflex platens distribute clamp force evenly across the platen face.
Reflex platens:
1. Allow for 10-30% lower clamp tonnage
2. Decrease mold wear
3. Improve part quality

Injection Units
demark systems offer both reciprocating screw (RS) and two-stage injection units. RS units offer the performance required for many PET applications while two-stage is appropriate for higher throughput applications.

Polaris Controls
PC-based controls manage all functions of our PET production systems, with optional packages to integrate auxiliaries and downstream part handling equipment. Advantages include:
1. Faster cycle times
2. Improved shot-to-shot repeatability
3. Remote connectivity through ServiceNetLink
4. Control of molding system and auxiliaries from a single interface

Linear Bearings
Linear bearings support the moving platen directly on the machine base. This design reduces mold wear by improving platen alignment and perpendicularity, and provides a grease free molding environment.

Technical Parameter:
TYPE DMK-PET48A DMK-PET48B
INJECTION UNIT Screw L/D Ratio L/D 25 25

Injection Pressure Kgf/Cm² 875 875

Machine Size(LxWxH) mm 9100×3790×2240 9100×3790×2240

Theory Shot Volume(Max) cm 1815 2905

Shot Weight(PS) g 2178 3486
ozs 77 123
CLAMPING UNIT Clamping Force T 360 360

Clamping Stroke mm 645 645

Max/Min Thickness of Mould mm 300~720 300~720

Space Between Tie Bars (WxH) mm 660×860 660×860

Ejector Stroke mm 180 180

Ejector Force T 12 12

NO. of Ejector Pins pcs 5 5

Max Pressure of System Kg/Cm² 140 140

INJECTION MOULD Cavity (Max) PCS 48 48

Neck of Bottle (Max) mm 42 42

Length of Preform(Max) mm 190 190

Weight of Preform(Max) g 35 45

Form of Mould Pneumatic pin-valve gate hot-runner

POWER UNIT Pump Motor Power KW 82 82

Robot Power KW 12 12

No. of Heater Zones(0~400°) set 49+10 49+10

Heater Input Capacity . KW 53 58

Mould Heater Capacity KW 51 51

Auto Manipulator Manipulator Cav 144 144

Cooling Form Cav 144 144

OTHER REQUEST Electric Power supply
(3-phase AC) V 380 380
KW 155 155
Chilling Water degree 5~15 5~15
Mpa 0.45 0.45
L/min 600 600
Cooling Water degree 30-55 30~55
Mpa 0.25 0.25
L/min 200 200
Compressed Air Mpa 0.7-0.9 0.7~0.9
L/min 800 800
Compressed Air (Max) Pcs/h 17000 17000


water cooled cased industrial chiller	Air cooled cased industrial chiller	Jar PET Preform Moulds With Shut-Off Nozzle(Without Tail)

PET Blow Moulding Machines(13000-18000 Bottles/Hour)	PET Blow Molding Machine-Reheat(5000-6000 Bottles/Hour)	32 Cavity-Pet Injection System Injection Moulding Machines

48 Cav Needle Valve of No-Cutting PET Preform Molds	Linear bottle blowing machine	Rotary blowing machine Max.600mL(18500-24000/bph)

Double Station Blow Molding Machine	Rotary PET Blow Molding Machine	preform mould 32 cavity

Related Searches :	pet preform injection machine , injection molding machine , injection molding systems
Country Of Origin :	China
Listing Type :	Sell
Brand Name :	DMK
Model Number :	DMK-PET48A, DMK-PET48B
Condition :	New
Terms Of Sale :	FOB ningbo
Terms Of Payment :	T/T or L/C
Minimum Order Quantity :	1 unit
Lead Time :	3 months
Contact :	Grace Fu
Address :	Zhaoyuan Road Western Industrial Area Huangyan, Zhejiang, 318020 China
Telephone :	[86] (576) 84239222
Fax :	[86] (576) 84052345