Relay protection tester Seller, Supplier, Exporter, Manufacturer, Factory

Relay protection tester
Wuhan Guodianxigao Electric Co.,Ltd
[ view Wuhan Guodianxigao Electric Co.,Ltd company information and other listings ]

Relay protection tester

This product may take inspection on a variety of relays, the protection and safety automatic devices on-site, and simulate complex transient, permanent, conversion failures of the entire group to test. It can alsoreal-time save test data, show vectorgraph, drawing all kinds of characteristic curves, on-line print statements, etc. Six-phase current, six-phase voltage output, can be easily ttialled on device for automatic and differential protection settings and, so that the trial is perfect.

1. Current source
a. Alternative current source
- 3 current outputs x 0 . . 30A
- Max output power: 250VA / phase
- 3 current outputs can be connected in parallel to generate a single phase current from 0 to 90A
- Continuous output current: 10A / phase
- Duty circle for max. current output: < 10s
- Accuracy: 0.1%
- Harmonic: up to 21st
b. Direct current source
- Output: 0 to 10A DC
- Max output power: 150 W
- Accuracy: 0.2%
2. Voltage source
a. AC voltage output
- Number of output voltage: 05
- Output voltage: from 0 to 130V each (live – neutral)
- Line voltage output: 0 to 260V (live – live)
- Max output power: 70VA/phase
- Accuracy: < ±0.1%
- Numbers of harmonic: up to 21st
b. DC voltage output:
- Output range: from 0 to 300V
- Max output power: 130W
- Accuracy:< ±0.2%
- Auxilary DC voltage source: 220V/ 110V selectable, 110VA
3. Contact inputs
- Input for dry contact: 1 to 20mA, 24V DC
- Input for wet contacts: 0 to 250V DC
4. Output contact: 250V / 0.3A DC
5. Accuracy:
- Frequency error: ±0.01Hz
- Phase error: ±0.2°
- Waveform distortion: ±0.3% (first harmonic)
- Time error: 40µs
6. Output frequency: 0 to 1050Hz
7. Timer: 0.1ms to 3600s
8. Power supply: 220V ± 10%, 50Hz ± 10%
9. Operating temperature: 0 to 400C
Storage temperature: -200C to 700C
10. Dimension: length × width × height = 360mm ×195mm ×375mm
11. Weight: Main unit 16.6kg


Storage battery tester	Partial discharge detection system	Loop(contact) resistance tester

GDZRC DC Resistance Tester	GDSL High Current Generator	TAG Phase Detector

GDZG DC High Voltage Generator	Transformer test equipment	Power quality analyzer

Cable fault detection system	circuit breaker tester

Related Searches :	relay protection tester
Country Of Origin :	China
Listing Type :	Sell
Contact :	Nancy Wang
Address :	No.17 Jiangxing Road Jianghan District Wuhan, Hubei, 430023 China
Telephone :	[86] (027) 65605916
Fax :	[86] (027) 65606183