Sell (F7) CXL5 Residual Current Circuit Breaker

(F7) CXL5 Residual Current Circuit Breaker You May Also Be Interested In: current circuit breaker residual circuit breaker residual current circuit breaker
(F7) CXL5 RCCB is in conformity with the standards of IEC 1008, and EN61008. CXL5 can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk, thus it is suitable to avoid the shock hazard and fire caused by earth leakage. CXL5 is mainly suitable for using in variety of plants and enterprises, buiding construction, commerce, guesthouses and families. It can be used in circuits up to
single phase 230V, three phases 400V 50 or 60Hz, CXL5 is not suitable for using on DC pulse system.
Techniacl Data
Rated voltage (Un) : 2 poles: 230V AC; 4 poles: 400V AC
Rated current (In) : 25, 40, 63A
Rated residual operating current (I △ no) : 0.5I△ n
Residual current off-time: <=0.1s
Minimum value of rated making and breaking capacity (Im) : 1KA
Rated conditional short-circuit current (Inc) : In=25, 40A Inc=1500A
In=63A Inc=3000A
Endurance: on load: 200 cycles; off load: 2000 cycles
A. Electrical
Design according to IEC1008 (EN61008)
Tripping time Undelayed
min. 10ms delay
min. 40ms delay
with selective disconnecting function
Rated voltage 230/400V; 50/60Hz
Rated tripping current 10, 30, 100, 300, 500mA
Sensitivity AC and pulsating DC
Rated short 10KA with 63A gL back-up fuse
Circuit strength 10KA with 80A gL (F7-80 and F7-863)
6KA (rated current 63A) with 63A gL
Maximum back-up fuse for 63A gL
Short circuit protection 80A gL (F7-80 and F7-863)
Maximum back-up fuse for 45A gL (F7-25 and F7-40A)
Overload protection 40A gL (F7-80A)
Resistance to climatic conditions according to IEC 1008
Degree of protection built-in switch IP40
Endurance electrical comp. <=4.000 operating cycles
Endurance mechanical comp. >=20.000 operating cycles

B. Mechanical
Frame size 45mm
Socket size 80mm
Device width 35mm (2 mod. ) , 70mm (4 mod. )
Mounting Quick fastening with 2 lock-in
Positions on DIN rail EN 50022
Upper and lower terminals Open mouthed / lift terminals
Terminal protection Finger and hand touch safe,
Terminal capacity 1-25mm2
Busbar thickness 0.8-2mm

Structure Features

Order Instructions

Characteristic Curve

Operation Principle

Outline and Installation Dimension
Brand Name