08C RFID Reader
You May Also Be Interested In:
proximity card reader
ERFID08C 125Khz Proximity Card Reader(HID Case)
5-16 V Operating voltages
International Standards Wigand 26Bits.
More than 50mm Reading Range
All in One Antenna
Support EM-ID or Mifare Serial Number
External control Audio / Visual Indication: Internal LED and Buzzer
Using + screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Red DC 5V-16V
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires