10/100Mbps Ethernet Network Adapter (LW-92A7 )
You May Also Be Interested In:
ethernet network adapter
IEEE 802.3u 100BASE-TX/ IEEE 802.3 10BASE-T
PCI local bus 2.1/2.2 specifications with clock frequency from 16.75MHz-40MHz
10/100Mbps Nway interface
32-bit PCI bus master operation
Low network command processing overhead
- Fully comply with PCI Bus Power Management Interface Spec. Rev. 1.0
Fully comply with Advanced Configuration and Power Interface (ACPI) Rev. 1.0
Supports 3 kinds of wake up events defined in Network Device Class Power Management Spec. 1.0.
Link State Change
Wake Up Frame
Supports IEEE802.3x Frame Based Flow Control scheme in full duplex mode.
2Kbyte on-chip FIFOs for both transmit and receive operations without external local memory.
Bus master architecture with linked host buffers delivers the most optimized performance.
Realtek Fast Ethernet RTL8100 Controller
Single shielded RJ-45 connector
UTP and STP supported
Full/half duplex for 10BASE-T and 100BASE-TX mode
Diagnostic LEDs for link, Tx/Rx
Complete driver support
High performance 10/100Mbps Adapter for PCI bus
Auto-detect 10/100Mbps operation in 10BASE-T or 100 BASE_TX, half or full duplex mode. It detects the connected hub's capability and auto-negotiates to use the highest available speed.
The adapter's dual interface allows users to migrate from Ethernet to Fast Ethernet in easy steps. 10BASE-T users can upgrade to 100BASE-TX anytime without changing driver software or network cabling.
Operates in the 32-bit bus master mode, delivering throughputs at multi-megabits per second with little stress on the host's CPU. Supporting PCI clock speeds of up to 40MHz independently of the network clock, it transfers data directly to/from the host's memory, by-passing the CPU to alleviate the host's workload.
Comprehensive Driver Support
The adapter supports all major network operating systems, including NetWare, Windows NT, Windows 2000, Windows 95, 98, UNIX and Linux.