8E1 to Ethernet Protocol Converter
You May Also Be Interested In:
8e1 to ethernet protocol converter
ethernet protocol converter
ISO9001:2000 OEM service offered.
EOP 8E1 to Ethernet converter realize Ethernet transparent transmission over 1~8E1 with maximum transmit rate of 15.84Mb/s. EOP adopts with international standard protocol(G.7041, G.7042, G,7043, G.8040) at all layers and able to intercommunicate with other supplier's products followed the same standard. The device not only provides perfect alarm/status indication for E1 and Ethernet interface, but with senior management function such as Ethernet data traffic statistics etc. The device is with high integration, low power consumption, stable performance and easy to use.
Realize Ethernet data transmission over 1~8E1
Support audo delete the fault E1 channels; Auto-restore the use of E1 after eliminate the failure.
For 8E1 channels, the maximum tolerable time delay difference between any two can be up to 220ms. It will have an alarm for exceed the limit when the time delay difference over 220ms, meanwhile, business interrupt jitter tolerance, jitter transfer characteristics in the line with ITU-T G.823.
Provide 4 maximum shared Ethernet interface, support VLAN division based on interface, in the line with IEEE802.1Q standard.
Provide 1024 pieces MAC address table, 5 minutes aging time
Support frame length: minimum 64 bytes, maximum: 1916 bytes
Provide flux statistics for each Ethernet interface, such as the fault package number and total package number etc.
Provide PAUSE flux control function, can be equipped with network management.
Support trunk super terminal management or network management based on SNMP(optional)