Sell Alum glass adhesive tape (rubber adhesive)

Alum glass adhesive tape (rubber adhesive) You May Also Be Interested In: adhesive for rubber glass adhesive glass adhesive tape industrial pipe rubber adhesive
T-FG701H
ALUM-GLASS CLOTH TAPE
PRODUCT DESCRIPTION:
Aluminum-Glass Cloth backing, combined with a high performance synthetic rubber-resin adhesive, protected by an easy-release silicone release paper.
FEAUTURES:
1 Aluminum-Glass Cloth backing provides excellent reflection of both heat and light.
2 High quality adhesive with super strong adhesion and holding power offers reliable and durable Aluminum-Glass Cloth Facing joints and seams sealing in industrial pipe thermal insulation application,
3 Low moisture vapor transmission rate makes T-FG701H an excellent vapor barrier.
4 Service Temperature range from -20 ? +80 ?C (-4~ +176 ?F)
TYPICAL PHYSICAL PROPERTIES:
PROPERTIES METRIC ENGLISH TEST METHOD
Alum. Foil Thinkness 7 Micron 0.28 Mil PSTC-33
Alum. -Glass Cloth Backing
120 Micron 5.2 Mil PSTC-33
Total Thickness (Backing + Adhesive) 170 Micron 7.4 Mil PSTC-33
Peel Adhesion to Stainless Steel 25 N/25mm 90 Oz. /In. PSTC-1
Peel Adhesion to Backing 25 N/25mm 90 Oz. /In. PSTC-1
RRolling Tack (11mm ball) 20 cm 8.0 In. PSTC-6
Holding Power 5,000+ Min. 5,000+ Min. PSTC-7
Service Temperature Ranger -20 ? +80 ?C -4 ~ +176 ?F ---------

TYPICAL APPLICATIONS:
HVAC industry for joining and sealing Alum. -Glass Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing industrial pipe insulation seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4") .
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 500m / 750m
STORAGE & SHELF LIFE:
One year when stored at 21?C (70?F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION:
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE:
It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10~ +400C (+50 ~ +105 ?F) .