Sell Blown Film Plant

Blown Film Plant You May Also Be Interested In: blown film blown film plant blown film plants cooling blower mulching film
blown film plant for LDPE/HDPE/HM/PVC/HIPS carry bags, garbage bags, mulching film small & wide width from 40 mm to 600 mm wide dies. We also manufacture blown film plants for flexible as well as regid sheets of PVC / HIPS for vacuum forming & thermoforming applications


Production/hour : 60 kg/hr
Film thickness range : 100 to 1000 MICRONS
Layflat tubing width : 1,000 mm to 2,000 mm
Power supply : 3 Phase, 415 V, 50Hz
Water consumption : 500 litter/hr by 1 HP Pump & Water Tank with Air Cooling Blower
Air consumption : 5 Kg/cm sq

SCREW (65 MM) :

Material : EN-41B, Stress Relieved, Gas Nitrided and Hard Chrome Plated
L/D Ratio : 24: 1


Material : EN-41B, Nitrided
Cooling arrangement : Blower cooling for zones 2 & 3
No. Of zones : 4 zones (3 on extruder, 1 on adapter)
Heating system : Mica Band Heaters

HOPPER : Capacity  50 kg.
MAIN DRIVE : 30 H. P. A. C. motor
GEAR BOX : Helical type with integral thrust bearing housing (Water Cooled)


Die size : 600 MM
Heating zone : 2 nos.
Air ring : Air ring made of Aluminium provided with 1 H. P. Blower


The take-off unit is fabricated of M. S. Profile having a total height of 12 fts. It has 2x 850mm nip rolls with manual clamping arrangement (1x Rubberized and 1x M. S. Hard-chrome plated-Water Cooled) with bearing reduction gearbox, D. C. motor (1/2 H. P. ) Flattening board and Irish ring


Consisting of 6 Temp. Controller, Ammetors, thermocouples, on/off switch for the entire cabinet, starter for the blower will be provided. D. C. Drive of = H. P. for Nip Roller And Winder.


850 mm torque winder with Nip Roller & manual clamping arrangement (1x Rubberized &1x M. S. Hard-chrome plated) D. C. motor & reduction gearbox with Slitting & Trimming arrangement.