Sell Box DIP Switch

Box DIP Switch You May Also Be Interested In: dip switch dip switches
MECHANICAL
1, Operation Force :800g Max
2, Stroke : 2.00mm
3, Operation Temp : -200~+700
4, Storage Temp : -400 to 850
ELECTRICAL
1, Electrical Life : 2000 operations cycles per switch 24 VDC, 25mA
2, Non-Switching Rating : 100mA, 50VDC
3, Switching rating : 25mA, 24VDC
4, Contact resistance : (a) 50 m(Ohms) max. at initial; (b)100m(Ohms)max. after life test
5, Insulation Resistance : 100M(Ohms), 500VDC
6, Dielectric Strength : 500VAC/1 minute
7, Capacitance :5pF max
8, Circuit : Single pole single throw
SOLDERING AND CLEANING PROCESSES
1, Keep all switch contacts in their "OFF" position for all operations
2, WAVW SOLDERING : Recommended Solder Temperature at 5000F (2600) max. 5 seconds
3, HAND SOLDERING : Use a soldering iron of 30 watts, controlled at 6080F (3200) approximately 2 seconds while applying solder
4, CLEANING PROCESS : Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results.
When vapor methods are used do not subject the switch to solvents at temperature above 1250F (510)
MATERIALS
1, BASE: ENGINEERING PLASTICS, Black
2, COVER: ENGINEERING PLASTICS, Red or Blue
3, BUTTON: ENGINEERING PLASTICS, White
4, TERMINAL: Alloy Copper, Gold plating
PACKING
All DIP Switches are shipped in standard IC tubes with all poles in the "OFF" position.
Brand Name
CWT
Certifications
RoHS
Model Number
WT11-DS-02(03,04,05,06,07,08,09)
Terms of Payment
T/T