Sell CONCRETE ADMIXTURE FOR WATERPROOFING SYSTEM BY CRYSTALLIZATION

CONCRETE ADMIXTURE FOR WATERPROOFING SYSTEM BY CRYSTALLIZATION You May Also Be Interested In: concrete admixture concrete slab restraints vaults water treatment plants
CONCRETE ADMIXTURE FOR WATERPROOFING SYSTEM BY CRYSTALLIZATION

The best developed WATERPROOFING SYSTEM worldwide.


DESCRIPTION

SIT-ADMIX is a unique chemical treatment for the waterproofing, protection and improvement of concrete.

SIT-ADMIX is added to the concrete mix at the time of batching. SIT-ADMIX consists of portland cement and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the by-products of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.

Note: The SIT-ADMIX Series has been specially formulated to meet varying project and temperature conditions (see Setting Time and Strength) .


RECOMMENDED FOR

- Reservoirs
- Sewage and Water Treatment Plants
- Secondary Containment Structures
- Tunnels and Subway Systems
- Underground Vaults
- Foundations
- Parking Structures
- Swimming Pools
- Pre-Cast Components
- Roof Decks


ADVANTAGES

- Resists extreme hydrostatic pressure from either positive or negative surface of the concrete slab
- Becomes an integral part of the substrate
- Highly resistant to aggressive chemicals
- Can seal hairline cracks up to 0.4 mm
- Allows concrete to breathe
-Non-toxic
-Less costly to apply than most other methods
-Permanent
- Added to the concrete at time of batching and therefore is not subject to climatic restraints
- Increases flexibility in construction scheduling


GERMAN HIGHTECH TECHNOLOGY WITH OVER 35 YEARS OF EXPERIENCE.

Consult with the Technical Department of RYARI ENTERPRISES INTERNATIONAL for the most appropriate SIT-ADMIX for your project.