Sell Coaxial Connections series signal protectors

Coaxial Connections series signal protectors You May Also Be Interested In: coaxial connections static discharge
Coaxial Connections series signal protectors are designed for protection of communication network circuits, which are sensitive to electromagnetic interference, avoid destruction result from lightning over-voltage, induced over-voltage and static discharge.

MAIN FEATURE:
 Multi-Protection circuits, low residual voltage.
 Large discharge current and quick response.
 Superior transmission performance.
 Excellent technics and long life even in bad circumstance
 Convenient installation.



PARAMETERS

Model LD*10K05# LD*10K24#
Continuous operating voltage Un 5V 24V
Nominal discharge current (8/205s) In 5kA
Max. discharge Current (8/205s) Imax 10kA
Protection level Up
8/205s Line~Out-conductor <=30V <=60V
Out-connductor
~Grounding <=100V
Output Voltage threshold at 1kV/5s <=700V
Adapt transmission rate 10Mbps
Insertion Loss <=0.5dB
Respond time 1ns
Dimensions 58mmW26mmW26 mm
Working environments Temperature -25~+650,
Humidity relative<=95% (250) , Altitude<=3km

* for connector type:
Connector
type BNC SMB N TNC NEC L9 CC4 F
* B S N T E L C F

#  for I/O mode:
I/O mode Male / Male Male / Female Female / Female Female / Male
# Y (R) M (Q) X (E) W (U)



INSTALLATION:
 Connect in series between protected equipment and signal channels. Should install close to the protected equipment
 Connect IN-port to signal channels and OUT-port to protected equipment.
 Connect lead to grounding bar dependably.
 No special maintenance needed. If malfunction occurs in operating system, please remove the protector, and then check the system. If system recovered, that means the protector has been damaged and must be replaced.
Brand Name
DOWIN
Certifications
ISO9001,CE
Condition of Goods
New
Model Number
LD*10K24#
Warranty Coverage
3 years