Color Printing and Rewinding Machine
You May Also Be Interested In:
IV. Other equipments:
1. Ten sets of rectifiers: two sets on three-piece N. W. There is one set on one set for hydrophilic (or perforated film) , top-sheet, colored N. W, air-laid paper, P. E film, small package, backside paper and release paper on wings each.
2. Auto re-feeding system: nine sets. They are on hydrophobic, hydrophilic (or perforated film) , colored N. W, air-laid paper, P. E film, small package, fast-easy tape, backside paper and release paper on wings each. .
3. Auto tension control system: six sets, unwind-material on the centre, adopt servo system. They are on hydrophobic, hydrophilic (or perforated film) , colored N. W, air-laid paper, P. E film, small package. They take puffed-shaft materials standing.
4. Computer control system (i. e. PLC-Man control-SERVO control system)
5. All the buttons are collected in different phase on the plane. There is PAUSE on every plane.
6. Temperature is controlled by temp. -controller separately.
7. The volume of SAP powder is fixed and shows on the touch-screen.
8. The volume of wood pulp is fixed and shows on the touch-screen.
9. The production turnover of single shift and total ones will show on the touch-screen.
10. The waste caused by re-feeding materials will be kicked off automatically. It will inspect the joints on the raw materials (But the joints must have its colors. ) The pieces number of waste can be designed on the touch-screen.
11. When the raw materials are gone, the machine will be stopped automatically.
12. The main machines speed can be fixed on the touch-screen. And it will work under the production speed which shows on the screen.
13. If there is something wrong with the electric appliance, it will be stopped automatically and the reason of breakdown will be shown and recorded.
14. There is switch for manual tick-off waste/reject.
V. Electrical appliance and others:
1. Main driving frequency regulator, PLC adopts MITSUBISHI.
2. SIEMENS low-voltage electrical appliance
3. Habsit flat belts
4. Japan bearings NTN or NSK
5. Japan UNITA synchronous belt
6. Japan Omron temperature controller
7. Taiwan XINYI electric-heat units
8. Taiwan AIRTECH pneumatic unit
9. Germany MERCOTEC mercury electric-ring
10. Germany BOSCH REXROTH servo control system
VI. Auxiliary equipment:
1. NORDSON hot melt applicator from U. S. A
2. BST rectifiers from Germany
3. Air compressor(prepared by customer himself)
VII. Offer for the equipment:
1. USD480000.00 (to produce two sizes of products) . The final price is according to the detail parts the buyer required.
2. The offer does not include air compressors.
3. The offer is FOB XIAMEN price.
4. Terms of payment: Referring to other relative document.
VIII. Spare parts:
1. One set of outer-cut knife for each size (with knife frame standing )
2. One set of flat-cut knife
4. Other wearing parts
5. Operation manual
IX. After-sale service:
1. The guarantee is one year from the date of delivery. The seller will supply service during machines servicing time.
2. The seller will supply the parts of the machine at favorable price.
X. Other remarks:
1. The contract will be effect from the date of receiving the down payment from the buyer.
2. The delivery time is according to the date of receiving the down payment and the confirm