You May Also Be Interested In:
The Compression fittings are extensively use because of it's simplicity, efficiency, low cost and easy of assembly.
# Assembly Instructions
1. Slide nut, Sleeve onto tubing. The thread end of the nut must face out.
2. Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
3. Assemble nut to body, and tighten the nut.
# Materials-Elbow and Tees
Brass forgings-Pioneer compression fittings are made from BS-218 material. The exceptional strength of forge fittings (Over 80% stronger than castings) provides an extra safety factor.
# Connectors, Unions and Nuts
Stress relieved brass bar stock-BS-249.
# Temperature Ranges
From - 65oF - 250oF
Fair resistance to vibration or tube movement, depending on applications involved. Use long nut for additional resistance to vibration.
Use with copper, brass and aluminium. Not recommended for steel tubing manufactured for low & medium pressure tubing connection work where excessive vibrations or tube movement is not involved. This fittings is widely used for connecting gasoline, grease, oil, water, vacuum and air lines
# Working Pressure Ranges
Temperature and type of tubings used are important factors. However, the following table is good guide for proper selection at temperature 60 F.
PSI TUBE Tube Wall
O. D. (in) (in)
400 1/8 . 030
400 3/16 . 030
300 1/4 . 030
300 5/16 . 032
200 3/8 . 032
200 1/2 . 032
150 5/8 . 035
100 3/4 . 035
75 7/8 . 035
# Ordering Information
To order, simply specify catalogue number for configuration and size desired.
1/4" tube X 1/4" BSP
Male Connection. Code No. C - 2025.
_______________ Brand of fittings (Compression)
| _____________ Thread Size
| | ____________ Type of fitting
| | | ___________Pipe Size
| | | |
C2 0 25