You May Also Be Interested In:
Our company is specialized in developing, manufacturing, and selling DC Electric Magnetism Contactor The DC Contactor we supply is used exclusively for the DC electric controling system. It is widely used in many fileds as follow: electric winch, communication equipment, engineering machinery, electric scooter, electric car, electric forklift etc.
K 400 DC Electric Magnetism Contactor
1. Contact arrangement: 2PDT
2. Contact Material: AgCdO Contact Rating (at resistive load) : 200A 24VDC 200A 250VAC
3. Over carry the electric current: 1050A/10S
4. (VDC) Rated Coil volt(VDC) :12, 24, 36, 48, 60 etc.
5. (VDC) Operating Volt in cold state at (20150) (VDC) : Pickup max 70% rated volt Release (5%~30%) rated volt
6. Contact Resistance: Max. 20m(Ohms) (initial)
7. Insulation Resistance: Min. 100m(Ohms) At 500 VDC
8. Puncture(volt) Strength:1000VAC 50HZ/60HZ(1 minute)
9. Operate Time: Max. 50mSec.
10. Release Time: Max. 50mSec.
11. Ambient Temperature:-250~+400 Relative Humidity:+20098%(up to 98% at+200)
12. Vibration freq. At The fixed postion:3g, 1~50HZ, ampl. 250/f2 3g, 1~50HZ, (frep. 1~10HZ, Ampl. 250/f2; frep. 10~50HZ, Ampl. 250/f2) 13. Mounting Directions:The contactors can be mounted vertically or horizontally, ifmounted vertically the coil should be at the bottom.