Double Routes Forming Baby Diaper machine
You May Also Be Interested In:
baby diaper machine
Main functions and features:
1. Driving system consists of synchronous belt ( Optibelt, made in Germany) and round arc gear combined with gear case; The key parts adopt NSK bearing (made in Japan) for smooth transmission, prolonging the lifetime of the machine. The functions are complete. It can produce diapers of economic type and high grade. It can produce three types of products(L, M, S) with a few parts changed. Changing is very easy.
2. Dual route forming system with wrapping by tissue, using large and small cotton cores. The products are economic and practical. SAP may be supplied at a fixed amount in designed locations or in a mixing way.
3. It has elastic waist, frontal waist tape and side waist tape.
4. It has three-piece standing cuffs on the surface . Material for stereo shield is cut and shaped by hot press on the equipment. It adheres to elastic ribbon to be formed for side leakage proof.
5. The phase may be adjusted without stopping machine.
6. Main raw materials are used with unwound, tension control system and can be filled or changed automatically.
7. After the side arcs are shaped, the wings will be three-folded lengthwise. The diaper pads will be output in line and easy for packing.
8. It can produce 3 sizes of diapers and diaper pad.
9. It has frontal waist tape, side waist tape and elastic waist .
Main Technical Parameters:
1. Type: JWC-LKSL
2. Design output:(100-150) pieces/min
3. Installation capacity:75KW(380V 50Hz)
4. Overall dimension:(17.5*1.9*2.7) m (L*W*H)
5. Total weight:20T
6. Equipment specification:(length*width) (it can as your order)
S:(380*270) mm M:(450*310) mm
L:(515*330) mm XL:(540*340) mm