Double Routes Forming Fast-easy Packing Sanitary Napkin machine
You May Also Be Interested In:
sanitary napkin machine
Main functions and features:
1. Adopt the crush system of board pulp. The long fiber of the fluff pulp ensures strong absorption. The cost for sanitary napkin is reduced a lot.
2. Double route forming system with de-molding is adopted, using large and small cotton cores. The products are economic and practical. SAP may be supplied at a fixed amount in designed locations or in a mixing way.
3. The equipment can produce napkins of three-pieces type, leaking proof, ultra-thin (as thin as silk) and medicinal type and regular type. During the producing process, it is not necessary to replace any part of equipment.
4. Each part of the equipment is mounted with differential device for phase correction during operation.
5. Press the flowing way before thermal sealing and the flowing way of the product is visible and clear.
6. After revolving the direction, the products are corrected and conveyed in equidistance. The packing of product is trim.
7. In the slitting unit, a scrapping-cutting mode is adopted to minimize the impact load, which prolongs the lifetime of the cutter.
8. Driving system consists of synchronous belt (Opt belt, made in Germany) and round arc gear combined with gear case; The key parts adopt NSK bearing (made in Japan) for smooth transmission, prolonging the lifetime of the machine. The adoption of turning gear wheel changes the direction 90 degrees, making the production speedy, simple and credible.
Main technical parameters:
2. Overall dimensions:(21*2.7*3) m(L*W*H)
3. Working space:(23*4*4) m(L*W*H)
4. Total weight:18.5T
5. Power supply:380V 50Hz
6. Installation capacity:58.5KW
7. Air consumption:1000 Liter/min at(8-10) Bars
8. Designing output:250 pieces/min
9. Economic output:(140-220) pieces/min
10. Equipment specification:(225-340) mm
1. Non-stop automatic and half-automatic material inception devices and tension control devices.
2. PLC which can help draw up working procedure.
3. Automatic position-limit adjusting device which can inspect quality , do calculation and reject wasters by using photo-electrical cells.
4. Touchable screen with which you can communicate with the machine.
5. The thermal-sealing cutter box can be driven by cylinder.