E1-10/100Base-TX Protocol Converter
You May Also Be Interested In:
e1 to ethernet
Protocol converter is the so-called network bridge. It change Ethernet frame into E1 to transmit, and then it change E1 into Ethernet frame at the other port. So Ethernet data can transmit in telecommunication network based on E1. In this way, protocol converter can make most of use of the remaining bandwidth of telecommunication line.
E1 port supports both framing and non-framing mode.
Ethernet port follows the standard of IEEE802.3, 802.3u, supports 10/100M, full-/half- duplex auto-negotiation.
Frame-length range that can transmit is from 64 to 2024 bit
It provides simple E1 testing operation mode.
Operator can set time spacing of E1, operation mode of Ethernet port through network management and dial-bit switch.
With perfect E1, Ethernet warning and state LED
Port: Electric :RJ45, E1:BNC
IEEE802.3/802.3u Ethernet, IEEE802.3ab 1000BaseT (electric interface) , IEEE802.3z 1000BaseX (optical interface) IEEE802.1d Spaning Tree, IEEE802.1q VLAN TAG, IEEE802.1P QoS.
Safety and EMC: Compliant with standard of FCC, UL, CE, TUV, CSA.
It still has the other type that is card-type protocol converter. If you have found the particular item that you are interested in, pls contact me at any time .