Sell ERFID08I Proximity Card Reader

ERFID08I Proximity Card Reader You May Also Be Interested In: plastic plug proximity card proximity card reader proximity reader

DC 5V-16V Working Voltage
Less than 80mA Static Current
5 to 10CM Reading Range
Support EM-ID Card or MIFARE 1 Card
0 C to 70 C Ambient Temperature
10%~90% Ambient Humidity
International Standard Wiegand Interface
More than 100M Communication Distance


Using +type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires