Sell FE1/10BaseT protocol converter

FE1/10BaseT protocol converter You May Also Be Interested In: ethernet frame fe1 to 10baset fe1/10baset protocol converter protocol converter

Product Description:
FE1/10BaseT converter adopts telecom line (E1 or E1 transmitting network, such as PDH, SDH, microwave, etc) to extend Ethernet. It converts Ethernet frame structure to E1 frame structure, and recovers E1 frame structure to Ethernet frame structure at the other side, which enables Ethernet data to transmit in telecom network based on E1. Because it is efficiently and effectively used the spare bandwidth of telecom providers, it saves the networking cost and improve the efficiency and can be used immediately.

Techonology Characteristic:
Realizes Ethernet data transmission of transparence or fraction time-slot in E1 line, bandwidth ranges from 64Kbps-2048Kbps
Support network management function, monitor and set the working status of device
Support Ethernet auto-negotiation and full/half duplex function
Support crossed and through ethernet interface
Support to transmit the ultralong frames regulated by IEEE 802.1Q; support Ethernet switch with VLAN function
Support data frame filter at local side
Provide unbalanced 75(Ohms) and balanced 120(Ohms) E1 interface
To possess the check function and opening conveniently

Interface Parameters:

E1 Port:
Comply with ITU-T G.703, G.704
Code Pattern: HDB3 code
Rate: 2048Kbps150ppm
Interface: 75(Ohms) BNC and 120(Ohms) RJ45

Ethernet Port:
Comply with IEEE 802.3(2000) standard
Rate: 10Mbps

Network Management Port:
RS232 network management interface, DB9

Working Conditions:
Power Supply: AC 220V120%, DC -36V~-72V
Power Consumption:<5W
Environment Temperature:0-50oC
Brand Name
Supply Capacity
1000 sets per day
Available Colors
Condition of Goods
Lead Time from Order to Shipment
within 3 working day
Model Number
Minimum Order Quantity
2 sets
Power Requirements
AC0V or DC48V optional
Terms of Payment
Terms of Sale