Sell FE1-Eth interface converter

FE1-Eth interface converter You May Also Be Interested In: 10 100 mbps converter interface converter
FE1 to Ethernet Converter

Product Introduction:

FE1/10Base-T interface converter is a high performance and self-learning Bridge for Ethernet extension. Its small size and low cost make it ideal for sensitive bridging applications, or as a LAN extendor or segmentor over fractional E1 bit stream. The Ethernet data is placed into an E1 frame, using only the required number of time-slots.

 Converts 10Base-T Ethernet interface into E1 interface
 Transmission bandwidth is N*64K(N=1~32)
 30,000 frames per second (wire speed) filtering and forwarding rate
 256-frame buffer
 Automatic learning and aging
 10,000 MAC address table
 Supports E1 balanced and unbalanced interfaces
 Provides two clocking modes for maximum flexibility
 Power supply: AC220V/DC-48V (optional)

Technical Specification:

E1 Interface
7 E1 interface: ITU-T G.703 compliant
7 Line code: HDB3
7 Bit rate: N*64Kpbs (N=1~32)
7 Nominal impedance: unbalanced 75(Ohms) /BNC balanced 120(Ohms) /RJ45

Ethernet Interface
7 Interface type: 10/100 Base-T/Tx
7 Interface standard: IEEE802.3/u compliant
7 Transmission bandwidth: up to 2084k bit/s
7 Data rate: 10/100 Mbps
7 Connector: RJ45

Power Input: AC/DC optional
Power consumption: <=5W
Operating temperature: -50~ +500
Storage temperature: -400~ +700
Humidity: 10%~90% non-condensing
No corrosive and solvent Gas, no fluty dust and intense magnetic-field interference

Standalone (19"/2) :
Dimension: 200mm(width) W43.5mm(height) W150mm(depth)
Weight: 0.8 kg
Rack type: EIA 19"
Brand Name
Supply Capacity
Model Number