FE1-V35 interface converter
You May Also Be Interested In:
FE1 to V.35 Converter
It is a FE1/V.35 channelizing interface converter, to realize the functions for conversion of electric level, conversion of rate, and extraction of time slot between FE1 Interface and V.35 Interface. The designated time slot is extracted freely from E1 signals, to form n*64kbps (n=1~32) V.35 channels. The equipment can be set through operation by DIP switch.
Convert V.35 into G.703 G.704 E1 Interface
The V.35 interface rate is n*64kbps (n=1~32) .
Able for loop-back of V.35 and E1 local and remote terminals.
E1 Interface: provides master, slave and external three optional clocking modes
Provides three optional framing, multiframing, and non-framing modes for E1 signals.
E1 interface impedance can be set at 75(Ohms) or 120(Ohms) .
Power Supply:AC220v and DC-48v, etc.
Hyper terminal and network administration functions reserved
E1 Port Standard
2M Port: ITU-T G.703 and G.704 compliant
Code Type: HDB3
Code Rate: 2.048Mb/s150ppm
E1 Interface: Unbalanced: 75(Ohms) /BNC or Balanced: 120(Ohms) /RJ45
V.35 Port Standard
Code Rate: nW64kbps (n = 1~32)
Clock :Master/Slave/Source three optional clocking modes
Interface Type: V.35 / DCE
Electrical Characters: ITU-T V.35 proposed standard balance
Terminal standard: ISO2593 compliant
Power Input AC and DC
Power Consumption: <=5W
Operating Temperature: -50~500
Storage Temperature: -400~+700
Relative Humidity: 10%~90% Non-condensing
No corrosive and solvent gas, no fluty dust and intense magnetic-field interference
Dimension: 200mm(width) x 43.5mm (height) x 150mm (depth)
Rack Type: EIA 19" Rack