Sell Fast-Eary Packaging Protective-Leakage Sanitary Napkin Machine

Fast-Eary Packaging Protective-Leakage Sanitary Napkin Machine You May Also Be Interested In: napkin napkin machine sanitary machine sanitary napkin sanitary napkin machine
1. Designed production speed: 550 pcs/min
2. stable production speed: 400 --500pcs/min (without package and common fluff pulp type) 350400pcs/min(with fast-easy package)
3. power: 380V 50HZ
4. machine power: 80kw (including that needed in hot melt applicators)
5. waste rate: <= 2% (excluding that caused by hot melt applicators and re-feeding materials)
6. overall size of equipment: (excluding crusher and stacker) : 18.5mX2.2mX2.3m (LxWxH) (designed temporarily)
7. the specification of products: 230mm and 280mm
II. Basic equipments on the machine:
1. Crusher: the teethchain-like crusher can adopt treated fluff pulp. The feed-in volume of fluff pulp can be controlled by stepless button.
2. Cotton core is formed by absorption in fluff-pulp box and wrapped by tissue paper.
3. The SAP powder is mixed with fluff pulp in the center part. SAP powder also is added continuously in the center part of cotton core. The scope is about 65mm. The feed-in volume of SAP powder can be controlled by stepless button.
4. There is sap paper inserted among the cotton core folded.
5. The cotton core is pressed in web firmly.
6. Inner-cut equipment: knife material is Cr12MoV, the knife shape is decided by the customer.
7. There are units for producing protection-leakage type. There are three lines of elastic bands on the both sides.
8. There is equipment of cutting and hit-dot unit. The dot shape is decided by the customer.
9. There is equipment of pressing the guide-flow channel. The shape of guide-flow channel is decided by the customer.
10. There is round-seal unit (add pressure by air cylinder) The round-seal pattern is decided by the customer.
10. There is a unit to add release paper in the middle. The length of release paper is decided by the customer.
11. There is one unit to adding release paper on the center part of product. The length of mid release paper is decided by the customer.
12. Outer-cut equipment: knife material is Cr12MoV, the knife shape is decided by the customer.
13. There is a revolving unit in 180 degree.
14. There is a unit to add release paper in the left-right wings. The length of release paper is decided by the customer.
15. There is onr chain-like unit to turn in 90 degree.
16. There is one sychronous-belt-like same interval unit.
17. There is folding unit.
18. There is one unit to add fast-easy tape. The length is decided by the customer.
19. There is one unit to press the packages firmly. (to add the presure by air cylinder) . The length of package is decided by customer.
20. The products can be out put vertically in a simple transfer steel plate.
III. Other equipments:
1. There are lights for spraying glue.
IV. Electrical appliance and others:
1. the shafts on the mian procedures are famous brands in China.
2. The flat belts are imported.
3. The timing/synchronous belts are Jiebao brand from Ningbo in China.
V. Assistant equipments:Supplier by the customer)
1. Two sets of HWANG SUN brand of hot melt applicators from Taiwan. (we suggest to buy the ones with good quality. )
2. Air compressor
VI. Offer for the machine
1. USD85,000.00 on FOB Xiamen. The offer does not include any set of HWANG SUN brand hot melt applicators and air compressor. The offer is on FOB basis. It does not include any freight fee. But if necessary, the seller can arrange it instead of the buyer and the relative charges are for the buyers account.
2. Terms of payment: 30% of the total amount will be paid by T/T and the rest will be by irrevocable L/C payable against shipping documents at sight.
VII. Spare parts:
1. One set of inner-cut knife (with knife shape) for both sizes
2. One set of outer-cut knife (with knife shape) for both sizes
3. One set of flat-cut knife
4. Other wearing parts(please refer to the PACKING LIST)
5. Operation manual
VIII. After-sale service:
1. The guarantee is one year from the date of delivery. The seller will supply service during the life time.
2. The seller will supply the parts of the machine at favorable price.
IX. Other remarks:
1. The contract will be effect from the date of receiving the down payment from the buyer.
2. The delivery time in seventy days since the datee of receiving the down payment.
Supply Capacity
550pcs/min
Weight
20t