Fischer-Porter Plug-in type electromagnetic flow meter
You May Also Be Interested In:
electromagnetic flow meter
stainless steel electrode
DIM plug-in electromagnetic flow meter is used to measure conductive liquid which is particularly applicable to large-diameter pipeline measurement, and is widely used in petroleum, chemical, metallurgical, power, paper, food, water treatment and other industries.
Model: DIM Series
Caliber: DN350 - DN2000
Accuracy: +/- 1.5% of measured values (standard) +/-1.0% of measured values
(special) +/- 0.5% of measured values (high precision)
The minimum conductivity: 55s/cm
Measuring range: Recommend use of: 0.5m / s ~ 10m / s continuous adjustable
The greatest use of: 0.2 m / s ~ 15m / s continuous adjustable
Medium temperature: -20- +150oC
Environmental temperature: -20- +60oC
Fluid pressure: <= 1.6MPa
Grading Protection: Sensor Converters
Material: probe materials: 304 stainless steel, electrode materials : 316 stainless steel, insulation layer : PTFE
Electrical Interface: M20*1.5,1/2 NPT
Shows: Standard dual LCD can also showed that the instantaneous and cumulative flow
Power: 220VAC 50HZ 24VDC
Explosion-proof grade: Exd[ia]iam ll CT5
1, volume can be set to switch: pulse output (maximum 1000 HZ) ;
High / low flow alarm;
Signal flow direction;
2, current output :4-20 mA output
1, through three key scene manual configuration.
2, the scene through remote configuration.
3, a parade through hands-site configuration.
Memory: The EEPROM memory will not disappear without batteries preservatio