You May Also Be Interested In:
color lcd monitor
fujikura fsm 40s
Applicable fibers SM(Singlemode) , MM(Multimode) and DS(Dispersion shifted) fibers. NZ-DS (Non-zero dispersion shifted) , CS(Cut-off shifted) and ED(Er doped) fibers are also applicable with special mode.
No. of fibers to be spliced Single to single fiber.
Fiber cleaved length 8 to 16mm with 2505m outer coating diameter. 16mm (standard) or 8 to 16mm (option) with outer coating diameter of more than 2505m up to 1000um (1.0mm) .
Actual average splice loss 0.02dB with SMF, 0.01dB with MMF and 0.04dB with DSF to ITU-T Recommendations G.652, G.651 and G.653 respectively, when measured by the cut-back method to relevant ITU-T and IEC standards.
Splicing time Typical 18 sec.
Return loss >> 60dB.
Splicing modes 40 user programmable modes and up to 60 modes for reference (factory predetermined setting) .
Splice loss estimate Core deformation and MFD mismatch as well as core axial offset can be taken into account for more accurate estimate.
Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.
Storage of splice result The last 2000 results to be stored in the internal memory.
Fiber display X/Y, or both X and Y simultaneously
Magnification of fiber 264X or 132X.
Viewing method CCD camera and 5" TFT color LCD monitor.
Altitude, Humidity andTemperature compensation 0 to 3,500m above sea level. 0 to 95%RH and -10 to 500C, respectively.
Mechanical proof test 2N (standard) / 4.4N (option)
Tube heater Built-in tube heater with 30 heating modes.
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves.
No. of splices with detacheable battery Approx. 40 times (including heatings) per full charge with BTR-05.
Power supply Auto voltage selection from 100 to 240Va. c. with ADC-07,
10.5 to 14Vd. c. with DCA-01 and 12Vd. c. with BTR-05.
Wind protection Max. wind velocity of 15m/s.
Dimensions 172W x 186D x 180H (mm)
Weight 4.4kg (4.9kg including AC adapter ADC-07) .