Sell Fused Loadbreak Elbow Connector

Fused Loadbreak Elbow Connector You May Also Be Interested In: current limiting elbow elbow connector hot line potential transformers
The CEE ZTR-15/200 Fused Loadbreak Elbow connector combines a general purpose, current-limiting fuse in a deadfront, submersible 200 Amp loadbreak eblow housing. Fuse replacement is easily accomplished by disconnecting the elbow from the source, unscrewing the probe and pulling apart the housing to expose the fuse.

The Fused Loadbreak Elbow connector is a fully-shielded and insulated plug-in termination, rated 200 amps,15kV, connected with underground cable ranging from 25 to 120 mm2(conductor cross section) .

The CEE ZTR-15/200 Fused Loadbreak Elbows are molded using high quality peroxide-cured EPDM insulation. It is used to connect underground cable to potential transformers, switchgear. The two test points are a vailable for using with hot line voltage indicators to determine fuse status and blown fuse indication.
Model Number
CEE ZTR-15/200
Power Requirements