GPS tracking device for vehicle
You May Also Be Interested In:
gps for tracking
gps tracking device
Locating and tracking
Save/delete mileage and Statistics
GSM blind make a report after the information
Cut off the oil (/ recovery circuit)
Terminal information inquiry
Enter or exit the electronic fence alarm
The designated route departure warning
Parking alarm overtime
Fatigue driving alarm
Idle time-out alarm
Custom alarm sensor
Emergency help alarm
Main power off alarm terminal
GPS antenna short circuit, open circuit alarm
Monitoring centre could check the vehicles by plate no, the device terminal will report the place where it is, the monitoring centre will pop up the position of the vehicle automatically.
Monitoring centre could set the time and sampling.
7Enable or disable oil/electricity
The monitoring centre could enable or disable the oil of the vehicle, or recover the oil or electricity after device received the demand.
After the authority by the administrator, when the vehicles need help, the monitoring centre will dial back, send isten in?demand to the terminal device, the terminal device will fulfill the order and dial the telephone back to listen in. (The SIM card should open the conversation function in vehicle)
When urgent cases happen, touch mergency button?for 1 second, then alarm starts and transferred to the alarm place. Monitoring center will arrange according to the procedures.
7Enter or exit the electronic fence alarm
Center can be set to one or more irregular range if out of the region the alarm will attributes, when the vehicles enter or exit the region set the scope, HE-101 will be prompted to enter the alarm region, at the same time trigger settings beyond the regional police, the center received alarm information later can be identified and the abolition of the police.
7over speed alarm
Monitoring centre set the max speed allowed, it will alarm when over this speed.
7Low voltage alarm
When the vehicle terminal detected voltage power lower than 9V and long than 10 seconds, it will alarm because of low voltage.
7Electricity disables alarm
When the vehicle terminals power is cut off, the device terminal will send alarm in 3 seconds, at the same time will powered by emergency battery (2 hours available)
7GSM blind zone
When the vehicle terminal located in the GSM blind area, the main device will save the blind point, and will complete the SMS to the monitoring centre when it is normal signal.
Monitoring center can directly designated to call for checking to a certain terminal, the terminals will feedback the detailed data to the monitoring center automatically.
Control Center can set time interval to let the designated vehicle to feedback data info from time to time, the factory default upload interval of 30 seconds, adjustable range is 5-120 seconds; If you set interval as "<5?seconds or "> 120 seconds ", the terminal equipment will automatically feedback defaulted by 30 seconds.
7Track route playback
Control Center can designate vehicle terminal device and set the time to pre-route the track playback, and shows on the map with dynamic display. It can also be derived in accordance with the settled time to playback the track data.
7Mileage and Statistics
Data can be saved from the vehicle installed in the car, so monitoring centre could check the mileage data save terminal device, or delete the data in storage, and also, it can also set the time in accordance with the Export-related mileage statistics.
7Cut off or recovery the oil/circuit
Control Center can with friendly remote control to disconnect circuit, oil circuit or the circuit to resume vehicles on the designated vehicle, when the car terminal received the command, will recover the oil or electricity supply.
7 Custom alarm sensor
The device has a 2-way custom line detector, to meet specific customer needs.
7Idle time-out alarm
when user required idle timeout alarm function, can set the idle timeout duration according to the actual situation.
Fatigue driving alarm and parking overtime alarm