GPW-500A Pneumatic Edge Milling Machine
You May Also Be Interested In:
edge milling machine
pneumatic edge milling machine
Pneumatic Edge Milling Machine
Max. Speed : 11,000 rpm
Horse Power : 3 HP
Weight : 18 kgs
Length : 430 mm
Width : 360 mm
Height : 250 mm
Air Cons. : 1.13 m3/min
Hose Size : 1/2" (I.D.)
Sound Pressure : 85.2 dBA
Air Pressure : 90 psi
Max. Thick Stone : 2 ~ 4 cm
Packing : 1 pc/2.5 cu.ft/G:23 kgs
1. Gravity Casting housing is extremely firm and solid.
2. Air hose with bended & flexible muffler tube.
3. A single side of the frame around the housing can be adjusted down to 12 degree for stabilizing centre of gravity when operating this edge milling machine.
4. This powerful, portable and reliable Router ideally suited for performing edge profiling and contours along straight or curved edges of natural stone slabs up to 40 mm thick.
5. Regulator for adjusting height of Diamond Disc Wheel (0~30mm).
6. Each of 7 Nylon rolling balls on the bottom contains 3 strong air injections enables easily movement and clean profiles, and DOES NOT SCRATCH the surface.
7. Locking Ring enables users to fix spindle and replace diamond disc wheel without any spanners.
8. Water valve for adjusting water flow with flexuous water hose on both side of housing with flexuous water hose can scour the residue on diamond disc.
9. Flexuous water hose can scour the residue on diamond disc.