GSM Wireless burglar alarms
You May Also Be Interested In:
smoke fire detector
GSM network protection, short message sending function. DIY, Customize,
easy-to-use and install! Adopts BENQ 323 industry module for GSM commucication. It features eight different wireless protection zones,
two wired protection zones, partial disarmed, remote telephone control,
remote electricity control, etc. compatible with CCTV surveillance and centre
1. Adopt the GSM network, no distance limit when alarming.
2. Can surpport the GSM mobile phone, with sending 3 short English messages function.
3. Can store 3 alarm phone numbers, which can send to the owners, policeman and the monitoring center.
4. Long distance to arm/disarm/panic alarm/monitor, monitor function: the people can hear clearly the voice on the spot.
5. The owners can control the small household through the mobile phone or telephone when they are out.
6. All kinds of wireless detectors can be compatible with the system, such as door sensor, P. I. R detector, remote controller, gas detector, smoke fire detector, panic button, infrared baluster.
7. No need the telephone line, very suitable for the garage, store, house, warehouse, shop and other places without network.
1. Wireless type, easy to install, without phone line.
2. Remote control, convenient.
3. Password protected
4. SMS to enable arm/disarm, partial arm/disarm, siren
5. High siren volume so as to scare away intruders
6. SMS and auto dial up three phone numbers, locale monitoring start on.
7. SMS to recheck the GSM panel status, alarm report, zone name,
8. Audible/mute siren programmed
9. Panic help
10. AC power shutoff self-detected to avoid malice destroyed, automatically switch to battery back-up
11. Enable to setup alarm receiving central through GSM network.
1. Protection zone:
wire : 2 wireless:8
2. GSM band: EGSM900/DCS 1800/PCS 1900MHZ
EGSM 880~915MHz 925~960MHz
DCS 1710~1785MHz 1805~1880MHz
PCS 1850~1910MHz 1930~1990MHz
It can save six alarm telephone numbers and separately set SMS function or
telephone alarm. transmitting power consumption:1W
3. LED indicators:8
4. low power protected time:<1 s
5. Data responds time: <10s (standard network)
6. working power voltage: AC 110~220V 50-60Hz (optional)
panel power consumption: <3W
Battery back-up: DC 9v Standby last >4 hours
7. working condition: temperature-20~+600
8. Net weight: 8.5 KG.
Gross weight: 0.75kg.
9. Panel Size: 180mm (l) W130mm (w) W32mm (h)
10. Standard package : one GSM module , one remote keyboard, two remote
controllers, one PIR detector, one door magnetic sensor, one siren , one