HH10325A GLASS STRAIGHT LINE MULTI-STAGE EDGING MACHINE
You May Also Be Interested In:
1. This machine can execute normal bottom edge polishing, it can also make miter edge of 0-45 degree.
2. This machine use manual control, , The conveyor adopts chain transmitting system consisting of special stretchy rubber pad.
The four motors can adjust angle from 0 degree to 45 degree for polishing bottom edge and miter edge.
3. Front rail is driven by motors and move in parallel to adapt to different glass thickness.
4. Working speed is adjustable through speed regulator.
5. . Glass thickness appear on Display
6. Amperometer allow to check wheel absorption and therefore its correct functioning.
7. Spindles for arris adopt drag plates structure, which is no vibration in working.
8. Stainless steel water tank
Minimum size of processed glass: 80W80mm
Maximum size of processed glass: 3000W3000mm
Thickness of processed glass: 3-25mm
Feeding Speeds: 0.5m/min-3m/min
Size (length WwidthW height) : 7100W1200W2500mm
Power : 22KW
Height of worktable: 750mm
Voltage: 3P ,380V, 50Hz
Maximum Arris angle: 450
Maximum grinding depth: 3mm
Maximum arris width : 2.5mm
Slope Angle: 00-450