Sell Hammer mill ——SG Series Multifunctional Mill

Hammer mill ——SG Series Multifunctional Mill You May Also Be Interested In: corn #3 corn 3 corn soybean hammer mill pvc foaming board
Introduction
The hammer mill of 40, 50, 60, 65 type are special products. It is the most ideal grinding equipment of all kinds of stalk, weed, corn, soybean, PVC foaming board, rubber, and etc. Structure reasonable, firm durable, safe reliable, easy operation, the vibration small, and the efficiency is high. It is widely used in the professions such as fodder factory, cultivation factory, organic fertilizer factory, Chinese medicine, chemical industry and so on.

Technical Parameter:
Model 40 50 60 65W55 65W75
Diameter of rotor (mm) 400 500 600 650 650
Width of studio (mm) 205 275 275 550 750
Main axis rotate speed (r/min) 3400 3100 2950 2950 2950
spec of screener (mm) 675W200 750270 940270 540W1020 740W1020
Linear Velocity of hammer (m/s) 71 81 92 100 100
Spec of hammer (mm) 120W40W4 180505 180505 180W50W5 180W50W5
quantity of hammer (pieces) 4W3= (12) 4W4= (16) 6W6= (36) 6W15= (90) 6W18= (108)
Related power (kw) 7.5 15 22 30/37 45/55
Wind absorbed quantity (m/min) 5 11 18 22/25 33/38
Raw material Holes of screener (mm) Capacity(T/h)
TYPE-40 TYPE-50 TYPE-60 TYPE-65W55 TYPE-65W75
Stalk #6 0.2-0.5 0.3-0.6 0.5-1 0.8-1.5 1-2
Corn #3 0.8 1.2 1.5 2-4 3-5
Note: This parameter is got on the condition of well installation, air-inhaling and work normally.
The component of raw material is not bigger than 14%, the rate of opening holes is below 33%.