You May Also Be Interested In:
Gear box features:
For SR gear box, the housing is cast precisely by high steel material and processed at pricessing center; The gears are made of high-quality alloy steel, are treated with surface hardening and gear ground; And the key parts are imported. The whole gear box is small in volume, with great load-carrying capacity, steady running, low noise and high efficiency. SR gear box has reached the advance international level, can replace the same kind of products imported, and can be used widely in over ten fields, such as metallurgy, mine, machine, energy, transportation, water conservancy, chemical industry, light industyry, printing package, pharmacy, food, textile, building, building material, tobacco, matter flowing, environmental protection.
1. High modularization design: May equip with various motor or other power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2. Transmission ratio: Fine division, wide scope. The combined machine type may form very large transmission ratio, i. E. Output very low rotary speed.
3. Form of installation: The position to be installed is not limited.
4. High strength, compact: The box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
5. Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
6. Low noise: Because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low;
7. Parallel axis -bevel wheel speed-down motor
1. Foot installment, flange installment
2. Various of motors or double shafts can be equipped
1. Power: 0.12 KW~160 KW
2. Torque: 85 N. M~18000 N. M
3. Ratio: 1.4~28000