KIA-2418 Capacitance Discharge Power Battery Spot Welder
You May Also Be Interested In:
battery spot welder
1. Machine head used cylinder with a combination of spring buffer, so that the pressure can be relatively adjusted by needle while welding, with the cushioning effect of the spring, the cylinder will not directly impact on the solder joints, therefore protect the welding plane effectively;
2. Weldment pressure between electrode can be adjusted through the regulator manual handle, for different solder pieces different welding pressure; with dial knob can accurately set welding pressure. When achieve the set pressure switch was triggered by electricity, will not damage the workpiece and the electrode;
3. The current moment release concentrated discharge, workpiece thermal deformation small, reducing the oxidation and discoloration, small electrode consumption;
4. Adopting microprocessor computing precision operation charge circuit, fast charging, stable charging voltage;
5. Using non-contact-type solid-state power components, reduce the failure rate of generation;
6. Modular circuit, parameter settings by keyboard, LCD display.
1. Mainly used to battery power connect pole piece welding, Aluminum shell lithium batteries and complex nickel strip welding, especially for A123 cells.
2. welding firm and beautiful, no rosin joint, compared to Ultrasonic Metal Welding Machine, it is low-cost, easy-to-use, non-deformation, no leakage, no waste.
Power Supply: AC 220V/50Hz
Stored Energy(5f) : 5400
Drive form: Pneumatic
Charge Voltage(V) : 50-400
Rated Frequency(Hz) :500
Welding Capacity (mm) : 1. 5+1.5
Electrode pressure (kfg) : 45
Electrode travel(mm) :6