Sell M100, D2

no image You May Also Be Interested In: residual oil
We are looking buyer for M100 with following spec. If interested in it, please contact us for further discussing.



COMPONENT REMARKS RESULT
1. Ash content, not more than % 0,14
2. Mass fraction of sulphur, not more % low sulphur residual oil #0,5
3. Temperature of the flash, not less 0C in the closed crucible 60
In the open crucible 0C 110 min
4. The temperature of solidification, not higher 0C 25
5. Kinematics viscosity 118 max
6. Water content 0.5%
7. Mechanical impurities #0.1%
8. Acidity # 5 mg KOH/ 100ml
9. Alkalinity nil
10. Gross Calorific Value Kcal/kg / KJ/kg Min 8900/Max 41300
11. Density at 15.0 0C in Kg/l 0.8900-0.9200
12. Hydrogen Sulfide Content (H2S) pom 0.5 max
13. Carbon Residual #7%
14. Vanadium (V) ppm 23
15. Aluminium (Al) ppm 5
16. Silikon (Si) ppm 12
17. Nickel (Ni) ppm 49
18. Asphaltenes m/m 3.6%
19. Distillation @4 mm Hg Extracted to 760 mm Hg
Initial Boiling Point 0C 216
5% recovered 0C 259
10% recovered 0C 310
20% recovered 0C 358
30% recovered 0C 445
40% recovered 0C 502
50% recovered 0C 534
60% recovered 0C 538
75% recovered 0C 545
80% recovered 0C -
90% recovered 0C -
Final Boiling point 0C 550
Percent Recovered vol 78%
Total Nitrogen m/ 22%
Residu vol 0.192%
20. Sodium (Na) ppm 15
Supply Capacity
200,000Mt
Certifications
SGS
Condition of Goods
new
Lead Time from Order to Shipment
45
Minimum Order Quantity
200,000Mt
Terms of Payment
RDLC
Terms of Sale
CIF